Pepperl+Fuchs BB10-P-8493/25/35/103/115a Thru-beam sensor
Item Number: BB10-P-8493/25/35/103/115a
- Single-beam miniature photoelectric sensor, ideal for installing in frames or contours
- Integrated circuit
- Plug-in style housing for 13 mm hole
- Light on version
- Overview
- Datasheet
- Alternative numbers
- Comments
| Angle of divergence | Emitter: +/- 3 В° Receiver: +/- 10 В° at max. sensing range ; typical |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| No-load supply current | Emitter: ≤ 20 mA Receiver: ≤ 10 mA |
| Connection | 160 mm fixed cable in M8 plug Receiver: Connection line, gray ; Emitter: Connection line, black |
| Optical face | frontal |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Effective detection range | 0 ... 2 m |
| Mission Time (TM) | 20 a |
| Operating voltage | 10 ... 30 V DC |
| Switching type | light on |
| Threshold detection range | 2.5 m |
| Response time | 5 ms |
| Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) , fixed -20 ... 60 В°C (-4 ... 140 В°F) , movable |
| Diameter of the light spot | approx. 250 mm at a distance of 2 m |
| Light source | IRED |
| Emitter | BB10-T-F1-8493/115a |
| Voltage drop | ≤ 1.5 V DC |
| Receiver | BB10-R-F1-8493/25/35/103/115a |
| Switching frequency | 100 Hz |
| Light type | modulated infrared light , 880 nm |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Relative humidity | 90 % , noncondensing |
| MTTFd | 795 a |
| Switching current | max. 100 mA |
| Mass | approx. 15 g per device |
| Ambient light limit | halogen light 100000 Lux ; according to EN 60947-5-2 |
| Function indicator | LED red: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted |
| Switching voltage | max. 30 V DC |
| Product standard | EN 60947-5-2 |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
Comments
No comments yet