Pepperl+Fuchs BB10-P-F1-6118/35/59/103/115e Thru-beam sensor

Pepperl+Fuchs BB10-P-F1-6118/35/59/103/115e
Item Number: BB10-P-F1-6118/35/59/103/115e
  • Single-beam miniature photoelectric sensor, ideal for installing in frames or contours
  • Integrated circuit
  • Plug-in style housing for 13 mm hole
  • Narrow opening angle, suitable for mounting in pairs
  • Dark on version
  • Version with test input
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Diagnostic Coverage (DC)0 %
EmitterBB10-T-F1-6118/115e
Relative humidity90 % , noncondensing
ReceiverBB10-R-F1/35/59/103/115e
Mission Time (TM)20 a
Optical facefrontal
No-load supply currentEmitter: ≤ 20 mA
Receiver: ≤ 10 mA
Voltage drop≤ 1.5 V DC
Diameter of the light spotapprox. 250 mm at a distance of 2 m
Degree of protectionIP67
Massapprox. 25 g per device
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) , fixed
-20 ... 60 В°C (-4 ... 140 В°F) , movable
Light typemodulated infrared light , 880 nm
Switching voltagemax. 30 V DC
Response time5 ms
Switching frequency100 Hz
Angle of divergenceEmitter: +/- 3 В° Receiver: +/- 10 В° at max. sensing range ; typical
Light sourceIRED
Switching currentmax. 100 mA
Accessories providednone
Product standardEN 60947-5-2
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Function indicatorLED red: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted
MTTFd795 a
Switching typedark on
CCC approvalCCC approval / marking not required for products rated ≤36 V
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Ambient light limithalogen light 100000 Lux ; according to EN 60947-5-2:2007
Effective detection range0 ... 2 m
Connection0.15 m cable with 3-pin JST connector Receiver: grey ; Emitter: black
Test inputemitter deactivation at 0 V
Operating voltage10 ... 30 V DC
Threshold detection range2.5 m

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required