Pepperl+Fuchs DAD30

Optical data coupler
Pepperl+Fuchs DAD30
Price on Request
One click request
Operation frequencyF1 = 83 kHz F2 = 118 kHz
Measurement output+1.8 ... 5.8 V DC, max. 10 mA,
simple stability control: 2.5 V triple stability control: 4.2 V
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Storage temperature-20 ... 75 В°C (-4 ... 167 В°F)
Degree of protectionIP65
Threshold detection range45 m
Connection25-pin Sub-D connector
No-load supply current200 mA
Diameter of the light spot500 mm at a distance of 30 m
Interface typeRS 232, RS 422, CL20 mA active/passive switchable
Alignment aidwith function display
Data rate0 ... 19.2 kBit/s
Mass500 g
Function indicatorLED red: switch point
LED green: sufficient stability control
Product standardEN 60947-5-2
Data sampling blankingInput for incoming data blanking with +24 V DC
Operating voltage24 V DC В± 25 %
Light sourceIRED
Pre-fault indication output2 PNP-outputs, short-circuit protected, 30 V DC 0.1 A
activated for single or sufficient stability control
Light typemodulated infrared light
Response delay40 µs
Effective detection range0 ... 30 m
Angle of divergenceEmitter: 1 В° Receiver: 5 В°
Control elements8-fold DIP-switch for selection of transmission frequency and interface
Ambient light limit30000 Lux
Transmission modeFSK
in international format without spaces
All fields are required