Pepperl+Fuchs DK12-11-5215

Print mark contrast sensor
Pepperl+Fuchs DK12-11-5215
Price on Request
One click request
UL approvalcULus Listed , Class 2 power source
Housing depth15 mm
MTTFd750 a
Switching typelight/dark on
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Housing width41.5 mm
Diagnostic Coverage (DC)60 %
Degree of protectionIP67
Switching voltagemax. 30 V DC
ConnectionMetal connector, M12, 5-pin, 90В° rotatable
Teach-In indicatorTeach-In mark: LED green/yellow equiphase flashing; 2,5 Hz . Teach-In background: LED green/yellow non equiphase flashing; 2,5 Hz . Teach-In dynamic: LED green/yellow equiphase flashing; 1.0 Hz . Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz .
Sensor range11 mm В± 2 mm
No-load supply current≤ 80 mA
Signal output2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected
Function indicator2 LEDs yellow, light up in case of detection
Operation indicatorLED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
Light sourceLED
Switching currentmax. 100 mA
Storage temperature-40 ... 75 В°C (-40 ... 167 В°F)
Function inputExt. Teach-In input (ET)
Mission Time (TM)20 a
Product standardEN 60947-5-2
Response time50 µs
Ripple10 %
Teach-Instatic and dynamic Teach-In
Light spot representation0.7 mm (effective light spot diameter)
Mass60 g
Light typemodulated visible red light , 660 nm
Switching frequency10 kHz
CCC approvalCCC approval / marking not required for products rated ≤36 V
Angle deviationmax. В± 3В°
Control elementsTeach-In rotary switch for Switching operation, Teach-In mark, Teach-In background and dynamic Teach-In
Housing height49 mm
Operating voltage10 ... 30 V DC
Protection classII, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
in international format without spaces
All fields are required