Pepperl+Fuchs FB1302B2

Digital Input
Pepperl+Fuchs FB1302B2
430.19
One click request
Connectionchannel I: 1+, 4-; channel II: 2+, 5-; channel III: 3+, 6-
Shock resistanceEN 60068-2-27:2009
EAC approvalRussia: RU C-IT.MIII06.B.00129
Degree of protectionIEC 60529:2000
LED indicationLED green: supply
LED red: line fault, per channel
LED yellow: signal (status), per channel
Number of channels3
Interfacemanufacturer-specific bus to standard com unit
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Vibration resistancefrequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration В± 0.075 mm/1 g; 10 cycles
frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration В± 1 mm/0.7 g; 90 minutes at each resonance
Occupied slots1
Codingoptional mechanical coding via front socket
Environmental testEN 60068-2-14:2009
Shock resistanceshock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Connectionbackplane bus
Internal resistor1 kandOmega;
ATEX approvalBVS 11 ATEX E 093X
Line fault detectioncan be switched on/off for each channel via configuration tool
EU-Type Examination CertificateBVS 11 ATEX E 093 X
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Power consumption0.75 W
Vibration resistanceEN 60068-2-6:2008
Rated voltage12 V DC , only in connection with the power supplies FB92**
INMETROBrazil: TГњV 14.1599X
Relative humidity95 % non-condensing
ConnectionEx e spring terminal with protective cover
Dimensions28 x 107 x 132 mm (1.1 x 4.2 x 5.2 inch)
Electromagnetic compatibilityNE 21:2007
Degree of protectionIP20 (module) , a separate housing is required acc. to the system description
System informationThe module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate.
Relative humidityEN 60068-2-78:2001
Power dissipation0.75 W
Switching point/switching hysteresis1.2 ... 2.1 mA / В± 0.2 mA
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
Minimum pulse duration20 ms
Connectionbackplane bus
Rated valuesacc. to EN 60947-5-6 (NAMUR)
Damaging gasEN 60068-2-42:2003
Massapprox. 350 g
in international format without spaces
All fields are required