Pepperl+Fuchs FB1303B2

Frequency / Counter Input
Pepperl+Fuchs FB1303B2
One click request
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Power consumption0.65 W
Internal resistor1 kandOmega;
Line fault detectioncan be switched on/off for each channel via configuration tool
EAC approvalRussia: RU C-IT.MIII06.B.00129
Relative humidity95 % non-condensing
Connectionchannel I: 1+, 2/3-; direction: 4+, 5/6-
Operating frequency0 ... 15 kHz
Power dissipation0.65 W
Interfacemanufacturer-specific bus to standard com unit
Degree of protectionIEC 60529:2000
Vibration resistanceEN 60068-2-6:2008
Rated valuesacc. to EN 60947-5-6 (NAMUR)
Number of channels1
Vibration resistancefrequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration В± 0.075 mm/1 g; 10 cycles
frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration В± 1 mm/0.7 g; 90 minutes at each resonance
LED indicationLED green: supply
LED red: line fault
Switching point/switching hysteresis1.2 ... 2.1 mA / В± 0.2 mA
Relative humidityEN 60068-2-78:2001
INMETROBrazil: TГњV 14.1599X
Environmental testEN 60068-2-14:2009
Codingoptional mechanical coding via front socket
EU-Type Examination CertificateBVS 11 ATEX E 093 X
Dimensions28 x 107 x 132 mm (1.1 x 4.2 x 5.2 inch)
ATEX approvalBVS 11 ATEX E 093X
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
Electromagnetic compatibilityNE 21:2007
Connectionbackplane bus
Occupied slots1
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see
Shock resistanceshock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Connectionbackplane bus
Shock resistanceEN 60068-2-27:2009
Degree of protectionIP20 (module) , a separate housing is required acc. to the system description
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Rated voltage12 V DC , only in connection with the power supplies FB92**
ConnectionEx e spring terminal with protective cover
System informationThe module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate.
Massapprox. 350 g
Damaging gasEN 60068-2-42:2003
in international format without spaces
All fields are required