Pepperl+Fuchs FB2204B

Digital Output with Position Feedback
Pepperl+Fuchs FB2204B
One click request
Electromagnetic compatibilityNE 21
Connectionbackplane bus
Minimum pulse duration1 ms
Occupied slots1
Connectionremovable front connector with screw flange (accessory)
wiring connection via spring terminals (0.14 ... 1.5 mm2) or screw terminals (0.08 ... 1.5 mm2)
Relative humidityEN 60068-2-56
Watchdogwithin 0.5 s the device goes in safe state, e.g. after loss of communication
Line fault detectioncan be switched on/off for each channel via configuration tool , also when turned off (every 2.5 s the valve is turned on for 2 ms)
Number of channels1
Power consumption1.6 W
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Internal resistor1 kandOmega;
Switching point/switching hysteresis1.2 ... 2.1 mA / В± 0.2 mA
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
Response time20 ms (depending on bus cycle time)
Rated voltage12 V DC , only in connection with the power supplies FB92**
Power dissipation1 W
Interfacemanufacturer-specific bus to standard com unit
Degree of protectionIEC 60529
Massapprox. 350 g
System informationThe module has to be mounted in appropriate backplanes and housings (FB92**) in Zone 1, 2, 21, 22 or outside hazardous areas (gas or dust). Here, observe the corresponding EC-type examination certificate.
Rated valuesacc. to EN 60947-5-6 (NAMUR)
Current limit52 mA
EU-Type Examination CertificatePTB 97 ATEX 1074 U
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see
Internal resistor220 andOmega;
Connectionchannel I: 2+, 5-; channel II: 3+, 6-
Vibration resistancefrequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration В± 0.075 mm/1 g; 10 cycles
frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration В± 1 mm/0.7 g; 90 minutes at each resonance
LED indicationLED green: supply
LED red: output line fault
LED yellow: status output
Connectionchannel I: 1+, 4-
Relative humidity95 % non-condensing
Environmental testEN 60068-2-14
ATEX approvalPTB 97 ATEX 1075 ; PTB 97 ATEX 1074 U
Degree of protectionIP20 (module) , a separate housing is required acc. to the system description
Connectionbackplane bus
Number of channels2
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Line fault detectioncan be switched on/off for each channel via configuration tool
Shock resistanceshock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Damaging gasEN 60068-2-42
Dimensions28 x 107 x 132 mm (1.1 x 4.2 x 5.2 inch)
Codingoptional mechanical coding via front socket
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Open loop voltage22 V
EAC approvalRussia: RU C-IT.MIII06.B.00129
in international format without spaces
All fields are required