Pepperl+Fuchs FB6305B200

Relay output
Pepperl+Fuchs FB6305B200
579.53
One click request
Watchdogwithin 0.5 s the device goes in safe state, e.g. after loss of communication
Shock resistanceEN 60068-2-27
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
Interfacemanufacturer-specific bus to standard com unit
Rated voltage12 V DC , only in connection with the power supplies FB92**
Response time20 ms (depending on bus cycle time)
System informationThe module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate.
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Degree of protectionIP20 (module) , a separate housing is required acc. to the system description
Connectionbackplane bus
Damaging gasEN 60068-2-42
Power dissipation1.05 W
Dimensions57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch)
Massapprox. 750 g
Vibration resistanceEN 60068-2-6
LED indicationLED green: supply
LED red: communication fault
Occupied slots2
Degree of protectionIEC 60529
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Connectionbackplane bus
Connectionwire ends 1/9 (white), 2/10 (brown), 3/11 (green), 4/12 (yellow), 5/13 (grey), 6/14 (pink), 7/15 (blue), 8/16 (red)
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
Shock resistanceshock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Connectionwire ends or shielded cable tail
wiring connection: separately covered Ex e terminals required
Relative humidityEN 60068-2-56
EU-Type Examination CertificatePTB 97 ATEX 1074 U
Electromagnetic compatibilityNE 21
Environmental testEN 60068-2-14
Relative humidity95 % non-condensing
Power consumption1.05 W
Number of channels4
Vibration resistancefrequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration В± 0.075 mm/1 g; 10 cycles
frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration В± 1 mm/0.7 g; 90 minutes at each resonance
in international format without spaces
All fields are required