Pepperl+Fuchs HiC5861Y1

Relay Module
Pepperl+Fuchs HiC5861Y1
180.39
One click request
Connectionloop powered
Safety Integrity Level (SIL)SIL 3
Rated voltage19 ... 27.6 V loop powered
Mountingon Termination Board
Massapprox. 100 g
Test inputsee Functional Safety Manual
Connection sidecontrol side
Energized/De-energized delay150 ms / 150 ms
Rated current0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card)
1-signal: 36 mA (minimum load current DO card)
Rated voltage19 ... 30 V DC loop powered
Mechanical life2 x 107 switching cycles
Signal typeDigital Output
Power dissipation< 1.3 W
Fuse rating3.15 A
Electromagnetic compatibilityNE 21:2012 , EN 61326-3-1:2008 , EN 61326-3-2:2008
CertificatePF 17 CERT 4312 X
Power consumption< 1.3 W
Display elementsLEDs
Test pulse lengthmax. 4 ms from DO card
Pulse/Pause ratio150 ms / 150 ms
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Output/Outputreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 Veff
Performance level (PL)PL e
Contact loading253 V AC/2 A/cos andphi; 0,7; 30 V DC/2 A resistive load
ConnectionInput SL1: 8a(+), 7a(-) ; test input SL1: 3a(-), 3b(+), 4a(+), 4b(+)
Connection sidefield side
Dimensions12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch)
Input/Outputreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 Veff
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Observe the temperature range limited by derating, see section derating.
Degree of protectionIEC 60529:2013
Minimum switch current10 mA / 24 V DC
Signal level0-signal: -5 ... 5 V
1-signal: 19 ... 27.6 V
Labelingspace for labeling at the front
Degree of protectionIP20
Switching frequency< 3 Hz
Codingno pin trimmed
For further information see system description.
ConnectionSL2: 5a, 7a; 1a, 3a
in international format without spaces
All fields are required