Pepperl+Fuchs HiDTB08-SCT-44C-SC-RA
Termination Board
| Electromagnetic compatibility | NE 21:2012 For further information see system description. |
| Display elements | LED PWR1 (Termination Board power supply), green LED LED PWR2 (Termination Board power supply), green LED LED FAULT (fault indication), red LED - LED lits: module failure - LED flashes: power supply failure |
| Mass | approx. 510 g |
| Fusing | 2 A , in each case for 8 modules |
| Supply | Redundancy available. The supply for the isolators is decoupled, monitored and fused. |
| Degree of protection | IP20 |
| Connection | X20: terminals 3, 5 (+); 4, 6 (-) |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Output type | volt-free contact |
| Ripple | ≤ 10 % |
| Reverse polarity protection | yes |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Dimensions | 150 x 200 x 163 mm (5.9 x 7.9 x 6.42 inch) , height including module assembly |
| Degree of protection | IEC 60529:2001 |
| IECEx approval | IECEx CES 11.0022 |
| Nominal voltage | 24 V DC , in consideration of rated voltage of used isolators |
| EU-Type Examination Certificate | CESI 11 ATEX 062 |
| Power dissipation | ≤ 500 mW , without modules |
| Voltage drop | 0.9 V , voltage drop across the series diode on the termination board must be considered |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Core cross-section | screw terminals: 0.25 ... 1.5 mm2 (24 ... 12 AWG) |
| Material | housing: polycarbonate, 10 % glass fiber reinforced |
| Connection | X20: terminals 1, 2 |
| Contact loading | 30 V DC, 1 A |
