Pepperl+Fuchs KCD2-ST-1.LB.SP Switch Amplifier

Pepperl+Fuchs KCD2-ST-1.LB.SP
Item Number: KCD2-ST-1.LB.SP
  • 1-channel signal conditioner
  • 24 V DC supply (Power Rail)
  • Dry contact or NAMUR input
  • 2 active transistor outputs
  • Usable as signal splitter (1 input and 2 outputs)
  • Reversible mode of operation
  • Line fault detection (LFD)
  • Housing width 12.5 mm
  • Connection via spring terminals with push-in connection technology
  • Up to SIL 2 acc. to IEC 61508
135.93
Quantity
-
+
Total price: 135.93
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Dimensions12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2
Rated voltage19 ... 30 V DC
Control elementsDIP-switch
Switching point/switching hysteresis1.2 ... 2.1 mA / approx. 0.2 mA
Rated current50 mA
Connection sidefield side
Output/Outputnot available , common pole terminal 9+
Degree of protectionIP20
ConnectionPower Rail or terminals 9+, 10-
Output Isignal ; Transistor
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Ripple≤ 10 %
Switching frequency≤ 5 kHz
Pulse/Pause ratiomin. 100 µs / min. 100 µs
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Safety Integrity Level (SIL)SIL 2
Power dissipation≤ 700 mW including maximum power dissipation in the output
Connectionoutput I: terminal 5 ; output II: terminal 6
Protection against electrical shockIEC 61010-1:2010
Input/Outputreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
InputEN 60947-5-6:2000
Massapprox. 100 g
Signal typeDigital Input
Electromagnetic compatibilityNE 21:2011
Labelingspace for labeling at the front
Configurationvia DIP switches
Rated current20 ... 15 mA + Iout
Display elementsLEDs
Connection sidecontrol side
Connectionterminals 1+, 2-
Line fault detectionbreakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Open circuit voltage/short-circuit currentapprox. 10 V DC / approx. 8 mA
Optional accessories- power feed module KFD2-EB2(.R4A.B)(.SP)
- universal power rail UPR-03(-M)(-S)
- profile rail K-DUCT-GY(-UPR-03)
Rated voltage30 V DC
Output IIsignal or error message ; Transistor
Input/power supplyreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Output/power supplynot available , common pole terminal 9+
Degree of protectionIEC 60529:2001
Rated valuesacc. to EN 60947-5-6 (NAMUR)
Response time≤ 200 µs
Signal level1-signal: (supply voltage) - 3 V max. for 50 mA
0-signal: blocked output (off-state current ≤ 10 µA)
Collective error messagePower Rail
Connectionspring terminals
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required