Pepperl+Fuchs LC10-1-D 115 VAC Loop detector
Item Number: LC10-1-D 115 VAC
- Sensor system for vehicle detection
- Complete control interface for inductive loops laid beneath the surface
- Reliable detection with long service life
- Various operating modes available
- Boost function for increasing sensitivity
- Test function
- Version with 1 loop channel
- Overview
- Datasheet
- Alternative numbers
- Comments
| Pulse length | period or 800 ms Pulse |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Ambient temperature | -20 ... 70 В°C (-4 ... 158 В°F) |
| Degree of protection | IP30 |
| Calibration time | 2 s |
| Operating voltage | 115 V AC ( galvanically isolated from loop ) |
| Switching voltage | 250 V AC |
| Output type | relay |
| Connection | Plug socket ; 11-pin Terminal connection 1.5 mm2 |
| Switching current | 6 A |
| MTTFd | 306 a |
| Operating mode | Pulsed and continuous signal |
| Marking | CE |
| Loop frequency | 20 ... 120 kHz |
| Ripple | -15 %/+10 % |
| Number of channels | 1 |
| Switching state | LED |
| Loop inductivity | 100 ... 1000 andmicro;H |
| Control elements | DIP-switch |
| Mission Time (TM) | 20 a |
| Power consumption | 1.6 VA |
| Response time | 100 ms |
Comments
No comments yet