Pepperl+Fuchs M-LB-1.150.D Surge Protection Barrier
Item Number: M-LB-1.150.D
- Surge protection for 1 supply line
- Type 2 acc. to EN 61643-11
- For 120 V
- Pre-wired unit
- Operating state and fault indication of every protected line
- Fault indication output
- DIN rail mountable
- Overview
- Datasheet
- Alternative numbers
- Comments
| Nominal voltage | 120 V AC |
| Maximum continuous operating voltage | max. 150 V AC max. 200 V DC |
| Device type | type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Output | volt-free change-over contact |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Max. surge current (8/20 micro/s) | 40 kA |
| Vibration resistance | EN 60068-2 |
| Degree of protection | IEC 60529 |
| Voltage protection level | max. 0.7 kV max. 0.55 kV at 5 kA |
| Relative humidity | 5 ... 95 % |
| Dimensions | 18 x 90 x 73 mm (0.7 x 3.6 x 2.9 inch) (1 TE acc. to DIN 43880) |
| Shock resistance | EN 60068-2 |
| Reaction time | max. 25 ns |
| Number of protected supply lines | 1 |
| Nominal discharge current (8/20 micro/s) | 15 kA |
| Ambient temperature | -40 ... 80 В°C (-40 ... 176 В°F) |
| Display elements | status display operating state (green) fault indication (red) |
| Degree of protection | IP20 |
| Overcurrent protection | max. 125 A gG , mains-side |
| Temporary over-voltage | 175 V / 5 s (TOV withstand) |
| Mass | approx. 240 g |
| Switch power | AC: 250 V / 0.5 A DC: 250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 A; 24 V/0.5 A |
| Connection | terminals 11, 12, 14 |
| Core cross-section | - min. 1.5 mm2 solid/flexible - max. 35 mm2 stranded/25 mm2 flexible - max. 1.5 mm2 solid/flexible (for remote signalling contact) |
| Short-circuit-proof | 50 kA eff |
| Suitable components | protection module M-LB-1.150.M |
Comments
No comments yet