Pepperl+Fuchs M13/MV13/32/40b/73c Thru-beam sensor
Item Number: M13/MV13/32/40b/73c
- Visible red light
- Pre-fault indication
- Light/dark ON, programmable
- Control input for light/dark switching
- Overview
- Datasheet
- Alternative numbers
- Comments
| Housing width | 18 mm |
| Threshold detection range | 22 m |
| Product standard | EN 60947-5-2 |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Light source | LED , 660 nm |
| Degree of protection | IP67 |
| Switching type | light/dark on |
| Adjustment range | 2 ... 22 m |
| Light type | modulated visible red light |
| No-load supply current | ≤ 25 mA |
| Operation indicator | LED green (emitter) |
| Time delay before availability | ≤ 30 ms |
| Response time | ≤ 3 ms |
| Housing depth | 38 mm |
| Effective detection range | 0 ... 15 m |
| Switching current | max. 200 mA |
| Switching frequency | ≤ 150 Hz |
| Control input | light on +UB dark on: 0 V |
| Operating voltage | 10 ... 30 V DC |
| Control elements | sensitivity adjustment |
| Mass | 40 g (device) |
| Connection | M12 connector, 4-pin |
| Switching voltage | max. 30 V DC |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Emitter | M13/73c |
| Receiver | MV13/32/40b/73c |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Function indicator | switching state: LED yellow pre-fault indicator: LED red |
| Ripple | 10 % |
| Ambient light limit | 10000 Lux |
| Housing height | 45 mm |
| Voltage drop | ≤ 2.5 V DC |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
Comments
No comments yet