Pepperl+Fuchs NEN6-8GM45-E2-V1 Inductive sensor

Pepperl+Fuchs NEN6-8GM45-E2-V1
Item Number: NEN6-8GM45-E2-V1
Series: Cylindrical type, Housing diameter: 8 mm, Housing material: brass, nickel-plated, Rated operating distance: 6 mm, Connection type: Connector M12 x 1 , 4-pin, Output type: 3-wire, Installation: non-flush, Type of voltage: DC
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
General specifications
Switching element functionPNP NO
Rated operating distance6 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 4.86 mm
Actuating elementmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
18 mm x 18 mm x 1 mm
Reduction factor rAl 0.5
Reduction factor rCu 0.45
Reduction factor r304 0.8
Reduction factor rBrass 0.55
Nominal ratings
Installation conditions
Ain steel 1.0037 (St37): 8 mm
B12 mm
C18 mm
F28 mm
Operating voltage10 ... 30 V DC
Switching frequency0 ... 750 Hz
Hysteresis0.06 ... 0.6 mm
Reverse polarity protectionyes
Short-circuit protectionpulsing
Overload resistanceyes
Wire breakage protectionyes
Surge suppressionyes
Ripple10 %
Voltage dropless than or equal to 2 V
Repeat accuracy0.3 mm
Operating current0 ... 200 mA , above 50°C max. 150 mA
Off-state currentless than or equal to 10 mA
No-load supply currentless than or equal to 15 mA
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd1740 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated less than or equal to 36 V
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector M12 x 1 , 4-pin
Housing materialbrass, nickel-plated
Sensing facePBT
Housing diameter8 mm
Degree of protectionIP67
Mass20 g
Tightening torque, fastening screwsmax. 2 Nm

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required