Pepperl+Fuchs NJ4-30GM-N-200-10M Inductive sensor
Item Number: NJ4-30GM-N-200-10M
- Temperature range
0 ... 200 В°C (0 ... 392 В°F)
- Overview
- Datasheet
- Alternative numbers
- Comments
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Output type | 2-wire |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Degree of protection | IP65 |
| Connection type | cable SIHF , 10 m |
| Hysteresis | 20 % at 200В°C |
| Use in the hazardous area | see instruction manuals |
| Reduction factor r304 | 0.55 |
| Switching function | Normally closed (NC) |
| Installation | flush |
| Switching frequency | 0 ... 1000 Hz |
| Reduction factor rCu | 0.05 |
| Sensing face | PPS |
| UL approval | cULus Listed, General Purpose |
| Assured operating distance | 0 ... 3.04 mm |
| Rated operating distance | 4 mm |
| Note | amplifier -25В°C...70В°C 2 m PTFE cable between amplifier and oscillator |
| Ambient temperature | 0 ... 200 В°C (32 ... 392 В°F) |
| Output type | NAMUR |
| Suitable for 2:1 technology | yes , Reverse polarity protection diode not required |
| Reduction factor rAl | 0.15 |
| Nominal voltage | 8 V |
| Core cross-section | 0.34 mm2 |
| Equipment protection level | Ga , Gb , Da |
Comments
No comments yet