Pepperl+Fuchs NMB10-18GM55-Z4-C4-300MM-V1 Inductive sensor
Item Number: NMB10-18GM55-Z4-C4-300MM-V1
- 10 mm flush
- Increased operating distance
- Stainless steel sensing face
- 2-wire DC
- Weld field immune
- Weld slag resistant coating
- Pigtail quick disconnect
- Overview
- Datasheet
- Alternative numbers
- Comments
| Operating voltage | 6 ... 30 V DC |
| Reduction factor rBrass | 0 |
| Mag. Field strength, AC fields | 250 mT |
| Voltage drop | < 3 V DC |
| Degree of protection | IP67 |
| Output polarity | DC |
| Reverse polarity protection | reverse polarity tolerant |
| UL approval | cULus Listed, General Purpose |
| Reduction factor rAl | 0 |
| Actuating element | Ferrous and nonferrous targets |
| Installation | flush |
| Switching frequency | 1 Hz |
| Rated operating distance | 10 mm |
| Sensing face | Xylan coated - Stainless steel 1.4305 / AISI 303 |
| CSA approval | cCSAus Listed, General Purpose |
| Switching function | Normally open (NO) |
| Reduction factor rSt37 | 1 |
| Assured operating distance | 0 ... 8.1 mm |
| Connection type | 300 mm POC cable with 3-pin , M12 x 1 connector |
| Output type | 2-wire |
| Switching state indicator | LED, red |
| Output type | Two-wire |
| Core cross-section | 0.34 mm2 |
| Mag. Field strength, DC fields | 250 mT |
| Reduction factor rCu | 0 |
| Operating current | 2 ... 100 mA |
| Hysteresis | 3 ... 15 typ. 5 % |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Housing material | Xylan coated - Stainless steel 1.4305 / AISI 303 |
| Off-state current | < 400 andmicro;A |
| Short-circuit protection | yes |
| Reduction factor r304 | 0.8 |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Comments
No comments yet