Pepperl+Fuchs NMB3-8GM65-E2-V3 Inductive sensor
Item Number: NMB3-8GM65-E2-V3
- Stainless steel sensing face
- 3 mm flush
- Increased operating distance
- Overview
- Datasheet
- Alternative numbers
- Comments
| Rated operating distance | 3 mm |
| Switching function | Normally open (NO) |
| Operating current | 100 mA |
| Operation indicator | LED red: output |
| Assured operating distance | 0 ... 2.43 mm |
| Output type | PNP |
| CSA approval | cCSAus Listed, General Purpose |
| Degree of protection | IP67 |
| Connection type | Connector M8 x 1 , 3-pin |
| Voltage drop | 2 V |
| Current consumption | 10 mA |
| Ambient temperature | 0 ... 75 В°C (32 ... 167 В°F) |
| Reduction factor rSt37 | 1 |
| Sensing face | Stainless steel 1.4305 / AISI 303 |
| Reverse polarity protection | yes |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| Installation | flush |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Switching frequency | 0 ... 360 Hz |
| UL approval | cULus Listed, General Purpose |
| Reduction factor r304 | 0.8 |
| Operating voltage | 10 ... 30 V DC |
| Hysteresis | 5 ... 15 typ. 10 % |
| Reduction factor rAl | 0.3 |
| Short-circuit protection | yes |
| No-load supply current | 15 mA |
| Off-state current | 10 andmicro;A |
| Housing diameter | 8 mm |
| Output polarity | DC |
| Reduction factor rCu | 0.2 |
Comments
No comments yet