Pepperl+Fuchs OBE12M-R102-SEP-IO-V31

Thru-beam sensor
Pepperl+Fuchs OBE12M-R102-SEP-IO-V31
Price on Request
One click request
Test inputemitter deactivation at +UB
LED risk group labellingexempt group
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F)
Switching voltagemax. 30 V DC
Mission Time (TM)20 a
Diameter of the light spotapprox. 65 mm at a distance of 1 m
Housing height33.8 mm
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Threshold detection range15 m
Device IDEmitter: 0x110405 (1115141)
Receiver: 0x110305 (1114885)
Compatible master port typeA
Control elementsReceiver: sensitivity adjustment
Process data widthEmitter:
Process data output: 2 Bit
Receiver:
Process data input: 2 Bit
Process data output: 2 Bit
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Response time0.5 ms
Housing depth18.3 mm
EmitterOBE12M-R102-S-IO-V31
SIO mode supportyes
Diagnostic Coverage (DC)0 %
MTTFd462 a
Interface typeIO-Link ( via C/Q = pin 4 )
Protection classIII
Parameterization indicatorIO link communication: green LED goes out briefly (1 Hz)
Light sourceLED
MassEmitter: approx. 10 g receiver: approx. 10 g
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Switching currentmax. 100 mA , resistive load
Transfer rateCOM 2 (38.4 kBaud)
Angle of divergence3.7 В°
ReceiverOBE12M-R102-EP-IO-V31
Min. cycle time2.3 ms
ConnectionM8 x 1 connector, 4-pin
Ambient light limitEN 60947-5-2 : 30000 Lux
Degree of protectionIP67 / IP69 / IP69K
Switching frequency1000 Hz
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Light typemodulated visible red light
Voltage drop≤ 1.5 V DC
Control elementsReceiver: light/dark switch
Housing width13.9 mm
Ripplemax. 10 %
Effective detection range0 ... 12 m
No-load supply currentEmitter: ≤ 14 mA
Receiver: ≤ 13 mA at 24 V supply voltage
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - Pin2: open
Operating voltage10 ... 30 V DC
Usage categoryDC-12 and DC-13
IO-Link Revision1.1
in international format without spaces
All fields are required