Pepperl+Fuchs OBE500-R2F-SE0-L Laser thru-beam sensor

Pepperl+Fuchs OBE500-R2F-SE0-L
Item Number: OBE500-R2F-SE0-L
  • Very flat design for direct mounting without mounting bracket
  • DuraBeam Laser Sensors - durable and employable like an LED
  • Detection of partially transparent objects by teach-in
  • Detection of small parts or flat objects from 0.25 mm
Price on Request
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Threshold detection range700 mm
Mission Time (TM)20 a
Switching thresholdTeach-In input
Switching currentmax. 50 mA , resistive load
Protection classIII
Ambient light limitEN 60947-5-2 : 25000 Lux
Angle of divergenceapprox. 1 В°
Light typemodulated visible red light , 680 nm
Massapprox. 20 g Per sensor
Switching voltagemax. 30 V DC
Signal output1 NPN output, short-circuit protected, reverse polarity protected, open collector
Voltage drop≤ 1.5 V DC
Optical facefrontal
Switching frequencyapprox. 2 kHz
Degree of protectionIP67
Function indicatorReceiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
Laser safetyEN 60825-1:2007
Housing height25.5 mm
Operation indicatorLED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
Test inputTest of switching function at 0 V
Housing depth4.1 mm
CCC approvalCCC approval / marking not required for products rated ≤36 V
Tightening torque, fastening screws0.25 Nm
Storage temperature-20 ... 70 В°C (-4 ... 158 В°F)
Effective detection range0 ... 500 mm
Diameter of the light spotapprox. 4 mm at a distance of 500 mm
Ambient temperature-10 ... 60 В°C (14 ... 140 В°F)
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Angle deviationapprox. 0.5 В°
Object sizetyp. starts from 0.5 mm ; typ. from 0.25 mm (after teach-in)
Housing width12 mm
MTTFd806 a
UL approvalE87056 , cULus Recognized, Class 2 Power Source
Diagnostic Coverage (DC)0 %
Cable length2 m
No-load supply currentEmitter: ≤ 10 mA
Receiver: ≤ 8 mA
Switching typeNO contact / dark on
Connection2 m fixed cable
Response time250 µs
Product standardEN 60947-5-2
Light sourceLASER LIGHT
Operating voltage12 ... 24 V


No comments yet

Write a comment

in international format without spaces
All fields are required