Pepperl+Fuchs TopScan-S-T0V1-MS/L900 Active infrared scanner
Item Number: TopScan-S-T0V1-MS/L900
- Moving presence sensor for swing doors
- Configurable for a wide range of door leaf widths
- Category 2, tested and certified to DIN 18650/EN 16005
- Modular construction with master/slave modules
- Safe function even on difficult floors
- Each beam can be adjusted individually
- Easy adjustment of transmitter for hinge side/ opposite hinge side
- Double-beam version
- Overview
- Datasheet
- Alternative numbers
- Comments
| Test input | active at U = -3 VDC to +1 VDC inactive at U = +4 VDC to 30 VDC |
| Signal output | Relay, 1 alternator |
| Housing length L | 900 mm |
| Relative humidity | Humidity at 20 В°C: < 90 % Humidity at 60 В°C: < 50 % |
| Operating voltage | 24 V DC +/- 20 % |
| Control elements | Sensing range adjuster ; Adjuster for edge monitoring left/right |
| TГњV approval | TГњV NORD |
| Safety Integrity Level (SIL) | SIL 1 |
| Diagnostic Coverage (DC) | 90 % |
| Detection range max. | 0 ... 2500 mm |
| Reference target | Minimum degree of reflection of the floor: 6 % Minimum degree of reflection to objects being detected: 0 % |
| Black/White difference (6 %/90 %) | < 2 % at 2000 mm sensor range |
| Switching type | Relay de-energized at object inside the scanning range |
| Note | Safety fuse 1 A (slow-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
| Mounting height | max. 2500 mm |
| Ambient temperature | -10 ... 50 В°C (14 ... 122 В°F) |
| Resolution | Reference object CA DIN 186850-1/EN 16005 in all applicable locations |
| Category | Cat. 2 |
| Switching voltage | 5 V ... 30 V AC/DC |
| Number of beams | 2 (number of built-in sensor modules AIR) |
| Switching current | max. 300 mA |
| Detection range min. | 0 ... 1500 mm |
| Product standard | EN 12978 ; EN 16005 ; DIN 18650 |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Function indicator | LED red/green |
| No-load supply current | 140 mA |
| Performance level (PL) | PL c |
| Light type | modulated infrared light 875 nm |
| Connection | screw terminals ; Cable cross-section 0.3 mm2 ... 1.3 mm2 (AWG26-16), single-stranded/multistranded CU |
| MTTFd | 880 a per module |
| Diameter of the light spot | 1.1 cm x 8.3 cm at 2000 mm sensor range |
| Mission Time (TM) | 20 a |
| Light source | IRED |
| Operating mode | Background evaluation |
| Response time | 70 ms |
| Functional safety | ISO 13849-1 |
| Degree of protection | IP52 , IP54 Optional (with special seal) |
Comments
No comments yet