Pepperl+Fuchs UC400-F77-IU-IO-0,2M-V1 Ultrasonic sensor

Pepperl+Fuchs UC400-F77-IU-IO-0,2M-V1
Item Number: UC400-F77-IU-IO-0,2M-V1
  • IO-Link interface for parameterization
  • Programmable via DTM with PACTWARE
  • Selectable sound lobe width
  • Synchronization options
  • Temperature compensation
  • Analog output
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
from 10 minutes after switching on the sensor ; 0,17 %/K (without temperature compensation)
Write cycles300000
Response delayminimum : 10 ms
factory setting: 37 ms
Deviation of the characteristic curve В± 1 % of full-scale value
Temperature influence В± 0.75 % of the end value (with temperature compensation)
Installation positionany position
Sensor cycle time 10 ms (factory setting) ;
programmable to 60 s
Power consumption 500 mW
Repeat accuracy В± 0.1 % of full-scale value
Degree of protectionIP67
Beam widthwide
Sensing range30 ... 400 mm
Tightening torque, fastening screwsmax. 0.2 Nm
No-load supply current 50 mA
Adjustment range40 ... 400 mm
Resolutioncurrent output: evaluation range [mm]/3200 but 0.35 mm
voltage output: evaluation range [mm]/4000 but 0.35 mm
Standard target plate20 mm x 20 mm
LED redsolid: fault
flashing: programming limits, object not detected
Time delay before availability 300 ms
Dead band0 ... 30 mm
Mass20.5 g
Transducer frequencyapprox. 310 kHz
Connection typeCable connector M12 x 1 , 4-pin , L = 200 mm
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Load impedancecurrent output: 500 Ohm
voltage output: 1000 Ohm
Non-volatile memoryEEPROM
Operating voltage18 ... 30 V DC , ripple 10 %SS
Output type1 analog output 0 (4) ... 20 mA or
1 analog output 0 ... 10 V
CCC approvalCCC approval / marking not required for products rated 36 V
Interface typeIO-Link (after individual activation via programming button)
LED greensolid: power on
flashing: standby mode or IO-Link communication
Ambient temperaturecurrent output -25 ... 60 В°C (-13 ... 140 В°F) voltage output -25 ... 70 В°C (-13 ... 158 В°F)
Input/output type1 synchronization connection, bidirectional
LED yellowsolid: object in evaluation range
flashing: programming of the limits, object detected
UL approvalcULus Listed, Class 2 Power Source
Outputnear limit: 40 mm
far limit: 400 mm
Output mode: rising ramp
output type: 4 ... 20 mA

Comments

No comments yet

Write a comment