Sick BTF08-P1BM0241
Wire draw encoders
Specification:
Part Number | 1060966 |
Part number mechanic: | 6028625 |
Connection type: | Connector 3 x M12, 5-pin, axial |
Working temperature range (combination): | Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik |
Mass (measuring wire): | 7.1 g/m |
Wire acceleration: | 40 m/s² |
Working temperature range (mechanics): | -30 °C ... +70 °C |
Length of wire pulled out per revolution: | 200 mm |
Electrical interface: | PROFIBUS |
Part number encoder: | 1051018 |
Life of wire draw mechanism: | 1 million cycles |
MTTFd: mean time to dangerous failure: | 150 a (ATM60 PROFIBUS), 60 a (A3M60) |
Number of steps per revolution: | 8,192 |
Mass (including encoder): | 1.58 kg (A3M60), 1.89 kg (A3M60) |
Actual length of cable extension: | 2.2 m |
Enclosure rating mechanic: | IP 64 |
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
Mass (mechanics): | 1.3 kg |
Initialization time: | Ca. 1 s, A3M60, Ca. 12 s, ATM60 PROFIBUS |
Measuring wire diameter: | 1.35 mm |
Enclosure rating encoder: | IP 67 |
Working temperature range (encoder): | -10 °C ... +70 °C, A3M60, -20 °C ... +70 °C, ATM60 PROFIBUS |
Power consumption: | 1.5 W (A3M60), 2 W (ATM60 PROFIBUS) |
Operating speed: | 4 m/s |
Mounted encoder: | A3M60, ATM60 PROFIBUS |
Resolution (wire draw + encoder): | 0.02 mm |
Protocol: | PROFIBUS DP V0 (A3M60), Profil für Encoder (07hex) - Class 2 (ATM60 PROFIBUS) |
SET (electronic adjustment): | Via PRESET push button or protocol |
Repeatability: | ≤ 1 mm |
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
Mounted mechanic: | MRA-F080-102D2 |
Address setting: | 0 ... 127, DIP switch |
Encoder: | Absolute encoders |
Bus termination: | Via DIP switches |
Hysteresis: | ≤ 2 mm |
Supply voltage: | 10 V ... 32 V |
Encoder profile: | Encoder profile version 1.1 class 1 and class 2 (A3M60), Profil für Encoder (07hex) - Class 2 (ATM60 PROFIBUS) |
Linearity: | ≤ ± 2 mm |
Measuring wire material: | Highly flexible stranded steel 1.4401 stainless steel V4A |
Relative humidity / Condensation: | 95 % (A3M60, condensation of the optical scanning not permitted), 98 % (ATM60 PROFIBUS, condensation of the optical scanning not permitted) |
Spring return force: | 6 N ... 14 N |
Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
Measuring range: | 0 m ... 2 m |
Housing material, wire draw mechanism: | Aluminum (anodised), die-cast zinc |