Sick DBS36E-S3EL00256 DBS36 Incremental encoder

Sick DBS36E-S3EL00256
Item Number: DBS36E-S3EL00256
  • Connection with universal cable outlet
  • Versions with blind hollow shaft or face mount flange with solid shaft
  • Face mount flange with 3 mounting hole patterns and servo groove
Total price: 86.15
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments


Part Number1062695
Initialization time:< 3 ms
Connection type:Cable, 8-wire, universal, 3 m
Pulses per revolution:256
Moment of inertia of the rotor:0.6 gcm²
Working temperature range:-20 °C ... +85 °C
Flange material:Aluminum
Operating speed:6,000 /min
Shaft material:Stainless steel
MTTFd: mean time to dangerous failure:600 a (EN ISO 13849-1)
Measuring step:90 ° / electronically/pulses
Short-circuit protection of the outputs:1
EMC:(according to EN 61000-6-2 and EN 61000-6-4 (class A))
Material, cable:PVC
Max. angular acceleration:500,000 rad/s²
Load current max.:30 mA
Electrical interface:7 V ... 30 V, HTL/Push pull
Storage temperature range:-40 °C ... +100 °C, without package
Mechanical interface:Solid shaft, Face mount flange
Maximum operating speed:8,000 U/min
Enclosure rating:IP 65
Shaft diameter:6 mm x 12 mm
Resistance to vibration:20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
Reverse polarity protection:1
Permissible shaft loading radial/axial:20 N (axial), 40 N (radial)
Start up torque:0.5 Ncm (+20 °C)
Housing material:Aluminum
Bearing lifetime:2 x 10^9 revolutions
Power consumption max. without load:Without load
Reference signal, position:90 °, electronically, gated with A and B
Maximum output frequency:300 kHz
Operating torque:0.4 Ncm (+20 °C)
Error limits:± 54 ° (/pulses per revolution)
Duty cycle:≤ 0.5 ± 5 %
Operating power consumption (no load):50 mA
Resistance to shocks:100 g (EN 60068-2-27)
Reference signal, number:1
Operating voltage range:7 V ... 30 V
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Measuring step deviation:± 18 ° / impulses per relovution


No comments yet

Write a comment