IN STOCK!!!

Incremental optical encoder

• Diameter: 80 mm
• Increased accuracy
• Suitable for all standard industrial applications

IN STOCK!!!

Connection cable HS35P with connector MIL, 10-pin / connector D-SUB, 0.5 m

• Accessory for Baumer 11076547
• Designed for heavy duty operations
• Used as a feedback element for motor control via an inverter

Hydac 0110 D 010 BN3HC filter insert

• Size: 0110, which corresponds to an outer diameter of 47 mm and an inner diameter of 21 mm.
• Length: 149 mm.
• Filtration fineness: 12 microns.
• Type of liquid: oil.

Plastic housing, ? 164, DC PNP, Cable, Sensing range 120 mm [nf] adjustable 30...120 mm

• LED status indicator of bus communication and read/write heads
• Max. 2 read/write heads can be connected
• Alternatively 1 read/write head and 1 trigger sensor can be connected

• Multiprotocol-compatible
• M12 power connector
• Sturdy metallic housing
• Web-based configuration

art. 10140876

• NAMURIFFK 10E9101 with<5 kHz
• 5 ... 30 VDC
• 10 mA

art. 10146214

• flush
• 1 mm
• 2 ... 20 % of Sr
• PNP make function (NO)
• -25 ... +75 °C

art. 10152822

• flush
• 1 mm
• 2 ... 20 % of Sr
• PNP make function (NO)
• -25 ... +75 °C

art. 10227109

• flush
• high temperature
• 2 mm
• NPN make function (NO)
• -25 ... +100 °C

• Metal thread
• M18 x 1
• DC PNP
• Gold-plated contacts
• Connector
• Gold-plated contacts
• Sensing range 5 mm [f]

• Metal thread
• M18 x 1
• DC PNP/NPN
• Increased immunity to conducted radio frequency interference
• Connector
• Sensing range 5 mm [f]

• Metal thread
• M30 x 1.5
• DC PNP
• Increased sensing range
• Cable
• Increased sensing range
• Sensing range 14 mm [f]

IN STOCK!!!

Inductive proximity sensors

• Size: M18
• Enclosure rating: IP67 
• Operating temperature: -25...+75° C

IN STOCK!!!

Drain Separator 91184630

• Effectively removes moisture and dirt
• Protects equipment from damage
• Easy to install and maintain
• Can be used in various fields

• Operating frequency 13.56 MHz
• Conforms to ISO 15693
• Suitable for FRAM transponder
• Read/write head with thread M18 x 1
• Connection via V1 (M12 x 1) plug connection
• Multihole-LED for function display
• Degree of protection IP67
• For connection to IDENTControl control interface

art. 11148770

• non-flush
• enhanced distance (GammaProx)
• 6 mm
• PNP make function (NO)
• -25 ... +75 °C

ITD 40 B10 Y 5

• Solid shaft ø11 mm with EURO flange
• Max. 2048 pulses per revolution
• Optical sensing method
• Centering alignment ø85 mm, mounting screw hole circle ø100 mm
• TTL or HTL output signals

IN STOCK!!!

MCC 56-14 I01B 502Р

Double series; 1.4 kV; 60 A; Uf max: 1.62 V

IN STOCK!!!

MCC 95-12 IO1B

Thyristor Module; two series diodes; 1.2kV; 116A

80.X30XX1.1024.MN33

80.X30XX1.1024.MN34

Inclination sensor, ± 45°, CANopen interface, Self-test function, Heartbeat, Emergency messages available

• 1-channel isolated barrier
• 24 V DC supply (Power Rail)
• Thermocouple, RTD, potentiometer or voltage input
• Current output 0/4 mA ... 20 mA
• Sink or source mode
• Configurable by PACTware
• Line fault (LFD) and sensor burnout detection
• Up to SIL 2 acc. to IEC 61508/IEC 61511

keyence fu 10

• Type: Transient spot
• Focal length: 10 to 30 mm
• Fiber length: 2 м
• Environmental resistance: -40 to +70 °C, 10 to 95 % RH

• 1-channel isolated barrier
• 24 V DC supply (Power Rail)
• HART field device input with transmitter power supply
• Usable as signal splitter (1 input and several outputs)
• 3 analog outputs 4 mA ... 20 mA
• Sink and source mode output
• Configurable by keypad

• 16-channel
• 24 V DC supply (Power Rail)
• HART field device input (revision 5 to 7)
• Up to 15 KFD0-HMS-16 slave units can be connected
• Up to SIL3 acc. to IEC 61508

• Sensing range 0.5...40 mm non-flush mountable
• Operating voltage 10...30 DC V
• 3-wire
• PNP
• M12 Connector

Cylinder accessory ref. UNIVER