• 2-pin
• For KC modules of K-System
• Integrated Cold Junction Compensation
• Packaging unit: 1 piece KC-CJC, 1 piece KC-STP-BU

• 2-pin
• For KC modules of K-System
• Integrated Cold Junction Compensation
• Packaging unit: 1 piece KC-CJC, 1 piece KC-STP-GN

• Counter/Timer
• Adding/subtracting via 2 separate inputs
• Batch controller with 1 pre-selection
• Easy-to-read, 2-line LCD display with symbols for indicated pre-selection and output status
• Display range and preselection range from -999999 up to 999999
  Overflow will be evaluated correctly up to 1 decade
• PNP and NPN sensors can be connected
• Degree of protection IP65 (front only)

• Counter/Timer
• Adding/subtracting via 2 separate inputs
• Batch controller with 1 pre-selection
• Easy-to-read, 2-line LCD display with symbols for indicated pre-selection and output status
• Display range and preselection range from -999999 up to 999999
  Overflow will be evaluated correctly up to 1 decade
• PNP and NPN sensors can be connected
• Degree of protection IP65 (front only)

• Counter/Timer/TacPepperl+Fuchster
• Adding/subtracting via 2 separate inputs
• Batch controller with 2 pre-selections
• Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs
• Multicolor display
• Display range and preselection range from -999999 up to 999999
  Overflow will be evaluated correctly up to 1 decade
• PNP and NPN sensors can be connected
• Degree of protection IP65 (front only)

• Counter/Timer/TacPepperl+Fuchster
• Adding/subtracting via 2 separate inputs
• Batch controller with 2 pre-selections
• Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs
• Multicolor display
• Display range and preselection range from -999999 up to 999999
  Overflow will be evaluated correctly up to 1 decade
• PNP and NPN sensors can be connected
• Degree of protection IP65 (front only)

• Counter/Timer/TacPepperl+Fuchster
• Adding/subtracting via 2 separate inputs
• Batch controller with 2 pre-selections
• Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs
• Display range and preselection range from -999999 up to 999999
  Overflow will be evaluated correctly up to 1 decade
• PNP and NPN sensors can be connected
• Degree of protection IP65 (front only)

• 1-channel signal conditioner
• 24 V DC supply (loop powered)
• Logic input 19 V DC ... 26.5 V DC, non-polarized
• Relay contact output for de-energized to safe function
• Test pulse immunity
• Up to SIL 3 acc. to IEC 61508
• Up to PL e acc. to EN/ISO 13849

• 1-channel signal conditioner
• 24 V DC supply (loop powered)
• Logic input 19 V DC ... 26.5 V DC, non-polarized
• Relay contact output for energized to safe function
• Test pulse immunity
• Up to SIL 3 acc. to IEC 61508

• 1-channel isolated barrier
• 24 V DC supply (loop powered)
• Current limit 45 mA at 12 V DC
• Housing width 12.5 mm
• Connection via spring terminals with push-in connection technology
• Up to SIL 3 acc. to IEC 61508

• 1-channel isolated barrier
• 24 V DC supply (loop powered)
• Current limit 45 mA at 10 V DC
• Test pulse immunity
• Housing width 12.5 mm
• Up to SIL 3 acc. to IEC 61508

• 1-channel isolated barrier
• 24 V DC supply (loop powered)
• Current limit 45 mA at 12 V DC
• Test pulse immunity
• Housing width 12.5 mm
• Up to SIL 3 acc. to IEC 61508

• 1-channel isolated barrier
• 24 V DC supply (loop powered)
• Current limit 45 mA at 12 V DC
• Test pulse immunity
• Housing width 12.5 mm
• Connection via spring terminals with push-in connection technology
• Up to SIL 3 acc. to IEC 61508

kcd2

• Signal transmission rate: up to 100 kbps
• Signal transmission distance: up to 100 meters
• Service life: up to 10 years
• Operating temperature: -20 to +60 °C

kcd2 e2

• Output signal: 0-20 mA, 4-20 mA, 0-10 V, 2-10 V
• Measuring range: 0-20 mA: 4-20 mA: 0-10 В: 2-10 В
• Accuracy: 0.5% FS
• Response time: 10 ms
• Operating temperature range: -25...+70 °C
• Humidity: 95% at 40 °C

kcd2 sr

• Overvoltage protection: up to 300 V
• Short circuit protection: up to 20 A
• Wire break detection: yes
• Thermostat: yes
• Temperature range: -20...+60 °C
• Humidity: up to 95% without condensation

kcd2 stc

• Rated supply current: 45 mA
• Maximum output signal voltage: 250 V DC
• Maximum output signal current: 20 mA
• SmartLink support
• HART support
• Support for Modbus RTU

• 1-channel terminal amplifier
• NAMUR sensor input
• DC 24 V supply voltage
• Standard interface for prevention of signal transmission errors
• Switching status indicator, yellow LED
• Short-circuit proof electronic output
• Low noise sensitivity
• Compact terminal housing
• Clips onto standard 35 mm rail to DIN EN 50 022
• Degree of protection IP20

• 1-channel terminal amplifier
• NAMUR sensor input
• DC 24 V supply voltage
• Standard interface for prevention of signal transmission errors
• Switching status indicator, yellow LED
• Lead breakage monitoring: The lead breakage monitoring can be disconnected by bridging terminals 1 and 3
• Short-circuit proof electronic output
• Low noise sensitivity
• Compact terminal housing
• Clips onto standard 35 mm rail to DIN EN 50 022
• Degree of protection IP20

• 1-channel terminal amplifier
• NAMUR sensor input
• DC 24 V supply voltage
• Standard interface for prevention of signal transmission errors
• Switching status indicator, yellow LED
• Short-circuit proof electronic output
• Low noise sensitivity
• Compact terminal housing
• Clips onto standard 35 mm rail to DIN EN 50 022
• Degree of protection IP20

• 1-channel terminal amplifier
• NAMUR sensor input
• DC 24 V supply voltage
• Standard interface for prevention of signal transmission errors
• Switching status indicator, yellow LED
• Lead breakage monitoring: The lead breakage monitoring can be disconnected by bridging terminals 1 and 3
• Short-circuit proof electronic output
• Low noise sensitivity
• Compact terminal housing
• Clips onto standard 35 mm rail to DIN EN 50 022
• Degree of protection IP20

• Relay output with 1 pole, yellow LED indicates switching state
• Free-wheeling diode
• Compact terminal housing
• Clips onto standard 35 mm rail to DIN EN 50 022
• Degree of protection IP20