Festo VADMI
| Nominal size, Laval nozzle | 3 mm |
| Max. vacuum | 85 % |
Festo VADMI
| Nominal size, Laval nozzle | 3 mm |
| Max. vacuum | 85 % |
Festo VADMI
| Nominal size, Laval nozzle | 0.45 mm |
| Max. vacuum | 85 % |
Festo VADMI
| Nominal size, Laval nozzle | 0.7 mm |
| Max. vacuum | 85 % |
Festo VADMI
| Nominal size, Laval nozzle | 0.7 mm |
| Max. vacuum | 85 % |
Festo VADMI
| Nominal size, Laval nozzle | 0.95 mm |
| Max. vacuum | 85 % |
Festo VADMI
| Nominal size, Laval nozzle | 0.95 mm |
| Max. vacuum | 85 % |
Festo VADMI
| Nominal size, Laval nozzle | 0.95 mm |
| Max. vacuum | 85 % |
Festo VAF
Festo VAF
Festo VAF
- AS-Interface certificate
- AS-Interface connection via flat cable and EMS standard bottom section (included delivery)
- Degree of protection IP65
- Voltage supply from AS-Interface
- Connection to PROFIBUS DP
- Commissioning, without PROFIBUS communication
- All AS-Interface functions possible via PROFIBUS
- PLC functionality
- Error diagnostics via LEDs and LC display
- Parameterization and monitor software
Festo VAK
Festo VAL
Festo VAM
- AS-Interface certificate
- PELV/SELV
- LED operating display
- 8 A output load
- 115 V AC / 230 V AC switchable
- AS-Interface data decoupling
- Overload protection using FUSE mode
PLC Power Supply
- Up to 2.8 A output load
- Power factor correction
- Electronic overload protection and display
- LED operating display
- AS-Interface data decoupling
- PELV/SELV
- NEC Class 2 Power Supply
PLC Power Supply
- Up to 4 A output load
- LED operating display
- 100 V AC up to 240 V AC
- AS-Interface filter integrated
- Earth fault detection
- 8 A output load
- 200 ... 500 VAC
- SELV
- LED operating display
- AS-Interface data decoupling
- Power factor correction
- Output current max. 4 A
- PELV
- Input voltage 24 V DC
- LED operating display
- 90.5 % efficiency level
- Up to 4 A output load
- Multiple AS-Interface networks can be operated through a single power stage
- Suitable for double master without data uncoupling
- Housing with removable terminals
- LEDs for display of AS-Interface voltage
- Minimum delay of signal
- Line lengthening by 100 m (max. 2 repeater in series)
- Galvanic isolation between AS-Interface circuits 1 and 2
- No parameterization
- Need no specific address on the AS-Interface bus
- Base for flat cable included in delivery
- Minimum delay of signal
- Line lengthening by 100 m (max. 2 repeater in series)
- Galvanic isolation between AS-Interface segments A and B
- No parameterization
- Need no specific address on the AS-Interface bus
- Housing with removable terminals
- The integrated terminator permits up to 200 m network lengths on Segment A
| Type | Installation accessories |