4we6d6x eg24n9k4 rexroth

• Rated pressure: 210 bar (3000 psi)
• Type of working fluid: HLP mineral oil or equivalent

4we6g6x eg24n9k4

• Nominal volume: 6 cm³
• Pressure drop: 2 bar (maximum value)
• Internal leakage: 0.5 cm³/min (maximum value)
• Switching time: 20 ms (maximum value)

4we6ha6x eg24n9k4

• Power consumption: 15 W
• Current: 0.63 A
• Switching frequency: up to 120 Hz

rexroth 4we6j6x eg24n9k4

• Fluid type: mineral oil
• Operating temperature: from -20°C to +80°C
• Viscosity of the working fluid: from 15 to 350 cSt at 40°C
• Degree of protection: IP65
• Connector: DIN 43650

4wree rexroth

• Supply voltage: 12 V or 24 V DC
• Switching frequency: up to 120 Hz
• Control signal range: 0-10 V or 4-20 mA

4wree 10 e75 2x g24k31 a1v

• Control signal type: analog current or voltage
• Control signal range: 4-20 mA or ± 10 V
• Input resistance: 470 kΩ
• Current consumption: ≤ 200 mA
• Protection: IP67

rexroth 4wrpeh

• Viscosity of the working fluid: 10...100 cSt (at 40°C)
• Working fluid temperature: From -20°C to +80°C

5 4we10 rexroth

• Number of positions: 2 (on/off)
• Control type: External electromagnetic
• Current consumption: 2.5 A
• Fluid: Hydraulic oil ISO VG 32 - 46
• Filtration: 10 μm
• Noise level: 70 dB (A)

• 316 SS
• External Mount
• 20-30VDC
• M2

Flow sensor without display

Type 8081 / Article No. 560131

• Type SET8 
• Item No. 560225

Siemens 5SL41017

• 230/400 V 10kA
• 1-pole
• C
• 1 A

Siemens 5SL41027

• 230/400 V 10kA
• 1-pole
• C
• 2A

Siemens 5SL41047

• 230/400 V 10kA
• 1-pole
• C
• 4A

Siemens 5SL41067

• 230/400 V 10kA
• 1-pole
• C
• 6A

Siemens 5SL41107

• 230/400 V 10kA
• 1-pole
• C
• 10 A

Siemens 5SL42017

• 400 V 10kA
• 2-pole
• C
• 1 A

Siemens 5SL42087

• 400 V 10kA
• 2-pole
• C
• 8A

Siemens 5SY41136

• 230/400 V 10kA
• 1-pole
• B
• 13 A
• D=70 mm

Siemens 5SY41206

• 230/400 V 10kA
• 1-pole
• B
• 20 A
• D=70 mm

Siemens 5SY41256

• 230/400 V 10kA
• 1-pole
• B
• 25A
• D=70 mm

Siemens 5SY45066

Siemens 5TE6800

• outlet 16 A according to DIN VDE 0620 
• for installation in distribution boards

Purge &Pressurization

Coil set 110/56 8W SG5

• Suitable for Zone 1 21 operation, ATEX/IECE certification
• Manifold combines the digital valve for purging and the needle valve for pressurization in one housing
• Suitable for steel or plastic tubing
• Mounting hardware, pneumatic fittings and tubing included

FS300R12KE3 & AGDR-72C S IGBT Module + Drive for ABB ACS800 Inverter

JINT-E1C; MC INTERFACE BOARD