ABB ACS150 Component Micro Drives

Component drives of ABB ACS150 answer the requirements of clients, producers of machinery and manufacturers of panel equipment. ACS150-01U drives can be purchased from most distributors of ABB equipment. Component drives are simple in a selection and possess the wide range of intrinsic functions in standard execution such as PID- regulation, inbuilt brake chopper, built-in control panel and potentiometer for adjusting of speed.

ACS150-01U are produced with one phase, power 200 .. 240V and 60 Hz. They don’t have EMC Filter.

• In mixers drives provide a high starting torque which improves the start of mixer.
• In conveyors speed of strap can be regulated by the drive of control engine.
• Heat-pump consists of evaporator with heat exchanger, compressor and condenser with heat exchanger and are devices for the transfer thermal energy from the source to the consumer. The transmission of heat is produced by working fluid – refrigerant, circulating in the internal loop. The system works as a caldron at heating and as a conditioner at cooling.
• Fans are used for ventilation and cooling in commercial, industrial and dwellings buildings.

ABB ACS150-03E drives have inbuilt EMS Filter, three phases, frequency 50Hz. This frequency converter series is produced for two voltage ranges: 200 - 240 V, 380 - 480 V.

This type has a lot of build-in features:  control panel, potentiometer, brake chopper, board with an additional protective varnish.

Another benefit of ACS150-03E is simplicity in mounting owing to small sizes and many variants of assembling.

Applications of ACS150 03E:

1. Mixers. After the start of drive with a high torque the noiseless control mode enlarges the frequency of switching keys inverter, resulting in reduced the drive noise.  The device of Flashdrop allows carrying out rapid and safe configuration of multiple identical drives for identical mixer applications.
2. Conveyors. Lines of production usually consist of a few successive conveyors which need to be efficiently linked to each other to ensure high production output. Drives allow to implement the smooth start and stop of the conveyor, while decreasing mechanical wear and reducing maintenance costs.
3. Heat pumps. Heat pumps equipped with the control system and automation, which supports a given mode of operation of the heat pump. Drives allow an user to regulate power of heating or cooling due to adjusting of the productivity of circulation pumps in a primary and secondary circuit loop. AC drives ptimizes energy efficiency and smooth system operations.
4. - Fans. Using a drive to regulate the flow of air, it is possible to implement the economy of electric power depending on the method of mechanical management a stream. The ABB drives have the built-in PID- regulator which optimizes airflow by adjusting the fan speed depending on the magnitude of the task. A miniaturized size and various variants of mounting allow to get the flexible system design.

ACS150-03U Micro Drives (3-phase input)