Festo Motors and servo drives
Festo CACR
Festo CACR
Festo CAMC
Festo CAMC
Festo CAMC
Festo CAMC
Festo CMMP-AS
| Current | 11 A |
| Nominal voltage AC | 400 V |
| Phases of Nominal voltage | 3-phase |
| Controller nominal output | 6000 VA |
Festo CMMP-AS
| Current | 13 A |
| Nominal voltage AC | 400 V |
| Phases of Nominal voltage | 3-phase |
| Controller nominal output | 9000 VA |
Festo CMMP-AS
| Current | 2 A - 3 A |
| Nominal voltage AC | 230 V |
| Phases of Nominal voltage | Single-phase |
| Controller nominal output | 500 VA |
Festo CMMP-AS
| Current | 2 A - 3 A |
| Nominal voltage AC | 230 V |
| Phases of Nominal voltage | Single-phase |
| Controller nominal output | 500 VA |
Festo CMMP-AS
| Current | 5.5 A |
| Nominal voltage AC | 400 V |
| Phases of Nominal voltage | 3-phase |
| Controller nominal output | 3000 VA |
Festo CMMP-AS
| Current | 5.5 A |
| Nominal voltage AC | 400 V |
| Phases of Nominal voltage | 3-phase |
| Controller nominal output | 3000 VA |
Festo CMMP-AS
| Current | 4 A - 6 A |
| Nominal voltage AC | 230 V |
| Phases of Nominal voltage | Single-phase |
| Controller nominal output | 1000 VA |
Festo CMMP-AS
| Current | 4 A - 6 A |
| Nominal voltage AC | 230 V |
| Phases of Nominal voltage | Single-phase |
| Controller nominal output | 1000 VA |
Festo CMMT-AS
| Current, load supply | 2.8 A |
| Nominal voltage AC | 230 V |
| Phases of Nominal voltage | Single-phase |
Festo CMMT-ST
| Controller operating mode | Cascade controller - P position controller - PI speed controller - PI current regulator for F or M - Profile operation with record and direct mode - Interpolated mode via fieldbus - Synchronised operating modes - Homing - Setting-up - Autotuning - Open-loop operation |
| Operating mode of drive unit | Field-oriented closed-loop control - Position resolution 24 bit/rev - Real-time data acquisition - 2x input capture (x, v, F) - 2x output trigger (x, v, F) - 1x position encoder input - Sampling rate 16 or 20 kHz - PWM with 16 or 20 KHz |
| Field bus, protocol | EtherCAT ® - EtherNet/IP - PROFINET IRT |
Festo EMGA
| Continuous output torque | 110 Nm |
| Max. drive speed | 7000 1/min |
| Torsional rigidity | 6 Nm/arcmin |
| Gear unit ratio | 5:1 |
Festo EMGA
| Continuous output torque | 110 Nm |
| Max. drive speed | 7000 1/min |
| Torsional rigidity | 6 Nm/arcmin |
| Gear unit ratio | 5:1 |
Festo EMMS-ST
| Total mass moment of inertia of output | 3 kgcm І |
| Max. rotational speed | 430 1/min |
Festo EMMS-ST
| Total mass moment of inertia of output | 1.9 kgcm І |
| Max. rotational speed | 550 1/min |
Festo EMMS-ST
| Total mass moment of inertia of output | 1.97 kgcm І |
| Max. rotational speed | 550 1/min |
Festo EMMT-AS
Festo EMMT-AS
| Total mass moment of inertia of output | 0.286 kgcm І |
| Nominal torque | 1.1 Nm |
Festo EMMT-AS
| Total mass moment of inertia of output | 0.169 kgcm І |
| Nominal torque | 0.64 Nm |
Festo EMMT-AS
| Total mass moment of inertia of output | 0.257 kgcm І |
| Nominal torque | 0.6 Nm |
Festo EMMT-AS
| Total mass moment of inertia of output | 0.169 kgcm І |
| Nominal torque | 0.64 Nm |
Festo EMMT-AS
| Total mass moment of inertia of output | 0.257 kgcm І |
| Nominal torque | 0.6 Nm |
Festo NEBM
| Electrical connection 1, connection type | Hybrid socket |
| Electrical connection 1, connector system | M23x1 |
| Electrical connection 2, connection type | Plugs and cables |
| Electrical connection 2, connector system | RJ45 and open end |
Festo NEBM
| Electrical connection 1, connection type | Hybrid socket |
| Electrical connection 1, connector system | M23x1 |
| Electrical connection 2, connection type | Plugs and cables |
| Electrical connection 2, connector system | RJ45 and open end |
Festo NEBM
| Electrical connection 1, connection type | Hybrid socket |
| Electrical connection 1, connector system | M23x1 |
| Electrical connection 2, connection type | Plugs and cables |
| Electrical connection 2, connector system | RJ45 and open end |