Pepperl+Fuchs Other Protection Products

• 1-channel signal conditioner
• 24 V DC supply
• Input bipolar millivolt sources
• Output bipolar current and voltage sources
• Accuracy 0.1 %
• Configurable via DIP switches and potentiometer
• Connection via screw terminals

• 1-channel signal conditioner
• 24 V DC supply
• Input 2-wire transmitters
• Dual output 0/4 mA ... 20 mA
• Signal splitter (1 input and 2 outputs)
• Accuracy 0.1 %
• Connection via screw terminals

• 1-channel signal conditioner
• 24 V DC supply
• Input 2-wire transmitters
• Input current and voltage sources
• Dual output 0/4 mA ... 20 mA, 0/1 V ... 5 V or 0/2 V ... 10 V
• Signal splitter (1 input and 2 outputs)
• Accuracy 0.1 %
• Connection via screw terminals

• 1-channel signal conditioner
• 24 V DC supply
• Input for 2- or 3-wire sensors or AC/DC voltage sources
• Relay contact output
• Timer function
• Configurable by DIP switches
• Connection via screw terminals

• 1-channel signal conditioner
• 24 V DC supply
• Input for 2- or 3-wire sensors
• Input frequency 10 mHz ... 50 kHz
• Relay contact output
• Start-up override and restart inhibit
• Configurable by DIP switches and software
• Connection via screw terminals

• 1-channel signal conditioner
• 24 V DC supply
• Thermocouple, RTD, potentiometer or mV input
• Input for PTC thermistor
• Current and voltage output
• Line fault (LFD) and sensor burnout detection
• Accuracy 0.1 %
• Connection via screw terminals

• 1-channel signal conditioner
• Field side loop powered
• Current input/output 0/4 mA ... 20 mA
• Accuracy 0.1 %
• Reverse polarity protection
• Connection via screw terminals

• 2-channel signal conditioner
• Field side loop powered
• Current input/output 0/4 mA ... 20 mA
• Accuracy 0.1 %
• Reverse polarity protection
• Connection via screw terminals

• Modular, lightweight design
• Low-power design with minimal heat dissipation
• VisuNet RM Shell 4.x or 5.x installed
• High connectivity flexibility due to multiple interface options
• Certified for ATEX and IECEx Zone 1/21
• UL listed for USA and Canada
• IP66

• Accessory for WHA-*-F8B2-*
• Lithium thionyl chloride battery
• Voltage 7.2 V
• Capacity 19 Ah

• Cast aluminum housing
• Loop powered
• Direct mounting on HART or 4 mA ... 20 mA field device
• Encapsulated antenna
• Up to 8 field devices in multidrop

• Installation in Zone 0, 20
• Installation in Class I, II, Division 1
• Installation in Class III
• Installation in Class I, Division 2
• Ex i circuits for Ex i field devices
• Cast aluminum housing
• Loop powered
• Direct mounting on HART or 4 mA ... 20 mA field device
• Encapsulated antenna
• Up to 8 field devices in multidrop

Accessory