Pepperl+Fuchs

• Housing with removable, mechanical and color coded terminals
• Communication monitoring
• Inputs for 2- and 3-wire sensors
• Addressing jack
• Power supply of outputs from the external auxiliary voltage
• Selectable supply to the sensors: External or from the module
• Function display for bus, external auxiliary voltage, internal sensor supply, inputs, and outputs
• Red LED per channel, lights up in the event of output overload
• Switchable lead breakage detection (outputs)

• Housing with removable terminals
• Communication monitoring
• Inputs for 2-wire sensors and mechanical contacts
• Addressing jack
• Power supply of the inputs and outputs from the external auxiliary voltage
• Function display for bus, ext. auxiliary voltage, inputs and outputs

• Housing with push-in connection technology and mechanically coded terminal blocks
• Housing width 19 mm, installation in the switch cabinet on DIN mounting rail
• Selectable supply to the sensors: External or from the module
• Function display for bus, external auxiliary voltage, internal sensor supply, inputs, and outputs
• Red LED per channel, lights up in the event of output overload

• Housing with push-in connection technology and mechanically coded terminal blocks
• Housing width 19 mm, installation in the switch cabinet on DIN mounting rail
• Selectable supply to the sensors: External or from the module
• Function display for bus, internal sensor supply, inputs, and outputs

• AS-Interface certificate
• Degree of protection IP67
• Flat or round cable connection (via standardized EMS base, not included with delivery)
• Cable piercing method for flat cable
• 2 integrated illuminated pushbuttons
• Variable colors

• AS-Interface certificate
• AS-Interface connection via flat cable and EMS standard bottom section (included delivery)
• Degree of protection IP65
• Voltage supply from AS-Interface
• Connection to PROFIBUS DP
• Commissioning, without PROFIBUS communication
• All AS-Interface functions possible via PROFIBUS
• PLC functionality
• Error diagnostics via LEDs and LC display
• Parameterization and monitor software

• AS-Interface certificate
• PELV/SELV
• LED operating display
• 8 A output load
• 115 V AC / 230 V AC switchable
• AS-Interface data decoupling
• Overload protection using FUSE mode

• Up to 2.8 A output load
• Power factor correction
• Electronic overload protection and display
• LED operating display
• AS-Interface data decoupling
• PELV/SELV
• NEC Class 2 Power Supply

PLC Power Supply

• Up to 4 A output load
• LED operating display
• 100 V AC up to 240 V AC
• AS-Interface filter integrated
• Earth fault detection

• 8 A output load
• 200 ... 500 V_AC
• SELV
• LED operating display
• AS-Interface data decoupling
• Power factor correction

• Output current max. 4 A
• PELV
• Input voltage 24 V DC
• LED operating display
• 90.5 % efficiency level

• Up to 4 A output load
• Multiple AS-Interface networks can be operated through a single power stage
• Suitable for double master without data uncoupling
• Housing with removable terminals
• LEDs for display of AS-Interface voltage

• Minimum delay of signal
• Line lengthening by 100 m (max. 2 repeater in series)
• Galvanic isolation between AS-Interface circuits 1 and 2
• No parameterization
• Need no specific address on the AS-Interface bus
• Base for flat cable included in delivery

• Minimum delay of signal
• Line lengthening by 100 m (max. 2 repeater in series)
• Galvanic isolation between AS-Interface segments A and B
• No parameterization
• Need no specific address on the AS-Interface bus
• Housing with removable terminals
• The integrated terminator permits up to 200 m network lengths on Segment A

• One open circuit
• Fulfills technical safety requirements for Category 4 according to EN 954-1, EN 61508, SIL 3 and Performance Level e (PL_e)
• Logic configuration by means of drag drop with diagrammatical display on the PC

• Two dependent or independent open circuits
• Fulfills technical safety requirements for Category 4 according to EN 954-1, EN 61508, SIL 3 and Performance Level e (PL_e)
• Logic configuration by means of drag drop with diagrammatical display on the PC
• Extended logic functions

• Two dependent or independent open circuits
• Fulfills technical safety requirements for Category 4 according to EN 954-1, EN 61508, SIL 3 and Performance Level e (PL_e)
• Logic configuration by means of drag drop with diagrammatical display on the PC

• Compact safety controller up to SIL 3/PLe
• 4 integrated, safe inputs
• 2 integrated, safe outputs (OSSDs)
• 8 logical, safe output groups (switchable)
• Increased functionality through integrated expansion port
• Parameterizable muting, timer and logic functions using SIMON+ software

• Compact safety controller up to SIL 3/PLe
• 4 integrated, safe inputs
• 2 integrated, safe outputs (OSSDs)
• 8 logical, safe output groups (switchable)
• Increased functionality through integrated expansion port
• Parameterizable muting, timer and logic functions using SIMON+ software
• Integrated data decoupling

• Inputs for 3-wire sensors
• Outputs for DC roller motors (drum motors)
• Interface for coupling with adjacent zones
• Connection of motors and sensors via M8 connectors
• Operating mode, motor speed and start/stop ramp can be configured using the rotary switch
• Supply of 24 V_DC, connection via insulation piercing technology with gold-plated contact pins
• Function indicator for power supply, inputs and outputs, and zone coupling

• One piece housing
• Simple and fast mounting
• Gold-plated and machined contacts
• Oil and abrasion resistant PUR line appropriate for drag chains
• Immunity to vibration
• Degree of protection IP68 / IP69K
• Halogen-free