Pilz Other Products

PSSu H PLC2 FS SN SD

• Ambient temperature: 0 - 60 °C
• Humidity: 93% r.h. at 40 °C, no condensation
• Operating height: 2000 m
• EMC: EN 61000-6-2, EN 61000-6-4, EN 61131-2 (Zone B)
• Vibration: EN 60068-2-6
• Shock: 1150 m/s²
• Clearance & creepage distance: EN 61131-2, overvoltage category II, pollution degree 2

PSSu E F 4DI

• Number of digital inputs: 4
• DC voltage at input: 24 V DC
• Potential isolation inputs: Yes

PSSu E F 4DO 0.5

• Terminal voltage for inductive loads off: U2 - 50 V
• Permitted loads: Resistive, Inductive, Capacitive, Semiconductor outputs
• DC voltage at output: 24 V DC
• Potential isolation short circuit: Yes
• Output short circuit proof: Yes

PSSu E F 2DOR 8

• Acc. shock to standard: 1150 m/s²
• Acc. shock to standard2: 2
• Clearance & creepage dist. to: EN 61131-2
• Overvoltage category: II

3 built-in buttons: ACT1 (green), ACT2 (red) and RESET (yellow)
Button size: 22 mm
Pressing force: max. 10 N
Button stroke: max. 5 mm

Ambient temperature: -20°C to +50°C
Ambient humidity: 35% to 95% (non-condensing)
Vibration resistance: Corresponds to DIN EN 60068-2-6
Impact resistance: Corresponds to DIN EN 60068-2-7

Maximum switching power: 48 W
Minimum switching power: 0.5 W
Leakage current: < 10 μA
Trigger time: < 20 ms
Trigger time: < 10 ms
Operating frequency range: 0 - 1000 Hz
Electrical strength: 2000 V AC/DC

Nominal voltage: 24 V DC
Maximum current: 2 A per key
Switching power: 48 W per key
Contact type: SPST (single pole, single throw)
Contact resistance: ≤ 1 Ohm

PSEN cable axial M12 8-pole 30m

• Nominal voltage: 24 V DC
• Nominal current: 2 A
• Maximum current: 4 A
• Insulation resistance: > 10 MΩ
• Electrical strength: 2500 V AC

PSEN cable M12-8sf, 20m

• Insulation resistance: > 10 MΩ at 500 V DC. current
• Capacitance: < 10 pF/m
• Inductance: < 1 μH/m
• Characteristic resistance: 50 ohms

Output type: PNP
Maximum switching current: 2 A
Trigger time: ≤ 10 ms
Reset time: ≤ 5 ms

Input type: PNP
Input current: ≤ 2 mA
Trigger time: ≤ 10 ms
Release time: ≤ 10 ms
Overvoltage protection: 30 V

PZE 9P 24VACDC 8n/o 1n/c

• Plug-in terminals: screw type
• Standards: EN 60947-4-1, EN 60947-5-1  
• Operating temperature: -10 to 55 °C  
• Relative humidity: up to 95%

 PZE X4P 24VDC 4n/o

• Climatic suitability to: EN 60068-2-78
• Ambient temperature: -10 to 55 °C
• Humidity rating: 93 % r.h. at 40 °C
• Condensation permitted: Not permitted
• EMC to standard: EN 60947-5-1, EN 61000-6-2, EN 61326-3-1
• Vibration to standard: EN 60068-2-6
• Clearance & creepage distance to: EN 60947-1
• Overvoltage category: III / II
• Pollution degree clear. & creep.: 2

PZE X4.1P 24VDC 4n/o

• Mounting position: any
• Connection terminal: Screw terminal
• Terminal style: plug-in
• Flexible cond. c/s AWG info: 24 - 12 AWG

PSWZ X1P 0,5V /24-240VACDC 2n/o 1n/c 2so

• Ambient temperature: -10 - 55 °C
• Humidity rating: 93 % r. h. at 40 °C
• Condensation permitted: Not permitted
• EMC to standard: EN 60947-5-1, EN 61000-6-2, EN 61000-6-4, EN 61326-3-1
• Vibration to standard: EN 60068-2-6
• Clearance & creepage dist. to EN 60947-1
• Overvoltage category: III / II
• Pollution degree clear.&creep.: 2

PSWZ X1P 3V /24-240VACDC 2n/o 1n/c 2so

• Product type: Safety relay (standalone)
• Function: Standstill monitoring
• Monitoring voltage (UM): 0.12 - 3 V AC/DC  
• Maximum monitoring voltage (UMmax): 690 V  
• Approvals: CE, cULus Listed, TÜV, CCC

PZE X4P C 24VDC 4n/o

• Power consumption: 2.5 W  
• Overvoltage category: III
• Rated insulation voltage: 250 V
• Operating temperature: -25 °C to +60 °C
• Storage temperature: -40 °C to +85 °C
• Relative humidity: Max. 95% (non-condensing)

S1PN 400-500VAC 2c/o

• Mounting position: any
• Connection terminal: Screw terminal
• Terminal style: fixed
• Flex. cond. c/s AWG info: 24 - 10 AWG

Mechanical resource: 1 million cycles
Electrical resource: 250,000 cycles
Degree of impact resistance: IK07
Vibration: 10 g (0.55 g²) at 10 ... 500 Hz

Switching capacity: 2 A
Activation time: max. 20 ms
Release time: max. 20 ms
Operating temperature range: from -20°C to +55°C
Vibration resistance: according to DIN EN 60068-2-6

SL 2ES 2SC

• Fiber type: Multimode fiber
• Wavelength: 850 nm
• Transmission distance: Up to 4 km
• Connector: SC

PSSu H PLC1 FS SN SD (312070)

PSSu H FS SN SD (312085)

PSSu E F PS2 (312192)

PSSu E F AI I (312260)

PNOZ X Set spring loaded terminals P1+P2 (374290)

PSSnet SHL 6T 2FSMSC MRP (380650)

S1SW P 24-240VACDC UM 0-690VAC/DC (407710)

PMCtendo DD4.03/112/230-480V (4105419)