Schneider Electric Altivar 630
- 200…240V
- UL type 1 conforming to UL 508C
- 50...60Hz - 5...5%
- 200…240V - 15...10%
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
atv630 110kw
- Nominal voltage: 380-480 V AC
- Operating voltage range: 200-500 V AC
atv630 11kw
- Input current: 18.4 A
- Output current: 25.3 A
atv630 22kw
- Power factor: 0.95
- Number of phases: 3
- Maximum output current: 60 A
- Output signal type: PWM
- Modulation frequency: 4-16 kHz
atv630 30kw
Incoming data:
- Rated voltage: 380-480 V AC (+/- 10%)
- Voltage range: 200-575 V AC
- Nominal frequency: 50/60 Hz
- Frequency range: 0.5-150 Hz
- Maximum current: 61 A
- Power factor: 0.95
- Efficiency: > 95%
atv630 37kw
- Control type: V/F, vector control
- Communication protocols: Modbus RTU, CANopen, EtherNet/IP, Profibus DP
- Degree of protection: IP21
- Type of cooling: Forced convection
atv630 45kw
- Operating temperature range: -10°C to +40°C
- Humidity range: 0-95% (non-condensing)
- Noise level: 65 dB (A) at 1 meter
- Vibration class: V3
atv630 55kw
- Control type: Vector with flow control
- Switching frequency: 4-16 kHz
- Operating modes: PID, PWM, serial control, analog control
atv630 7.5 kw
- Maximum current: 24.8 A
- Power frequency range: 47-63 Hz
- Power factor: 0.95
- Efficiency: 95%
- Type of cooling: Forced air
- Insulation class: F
atv630 vfd
- Operating temperature range: -10°C to +40°C
- Humidity range: 0-95% (non-condensing)
- Noise level: 65 dB (A) at 1 meter
- Vibration class: V3
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Floor-standing |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Floor-standing |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Floor-standing |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Floor-standing |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Floor-standing |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Floor-standing |
atv630d30n4
- Controls: Touch or vector control (depending on model)
- Overload capacity: 150% for 60 seconds
- Input current: 53.3 A at 380 V (nom.)
- Output current: 61.5 A at 4 kHz (nom.)
- Maximum transient current: 67.7 A for 60 seconds (nominal)
ATV600/ATV630, 250kW/400 hp, 380 - 480 V, IP00
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
| Product specific application | Process and utilities |
| Device short name | ATV630 |
| Variant | Standard version |
| Product destination | Asynchronous motors Synchronous motors |
| Mounting mode | Wall mount |
Altivar Process ATV630 (Altivar 630) is s a frequency converter from 0.75 kW to 800 kW with built-in intelligent services that make it unique and provide overhead savings for industries and infrastructure. They are intended to control three-phase asynchronous and synchronous electric motors with magnets. Also they have specialized functions that control the pumps.
Altivar Process Low voltage VFD allows fuller to use the hardware capabilities and reduce operating costs due to optimization of energy consumption and comfort of the use.
Schneider ATV 630
The Altivar Process ATV630 is a frequency converter with built-in intelligent services that provide the opportunity to reduce operating costs in industries and utilities.
There are large number of features, which are integrated in Schneider Altivar 630, in particular::
- Built-in power measurement and power consumption toolbar.
- Integrated control and process control.
- Built-in pressure-flow graphs of the pump (the ability to set 5 points of the graph).
- Low harmonics (THDi < 48% at 80% load or THDi < 5% for low harmonic drives).
- "Start and stop" function to reduce power consumption when stopped.
- Monitoring and protection of the actuator.
- Monitoring the deviation of the current pump mode from the point of maximum efficiency.
- Easy maintenance (dynamic QR code).
- Easy integration into communication networks with a built-in Ethernet port.
- Device configuration using Smart Process Object technology.
- Embedded Web Server.
- Reliable cooling and harmonic suppression technology.
- Modular and compact design.
- Easy integration into power grids.
- Local and remote control capabilities (PLC, remote terminal, HMI).
- Full set of control functions.
Schneider Electric ATV630 is specially designed for use in industrial processes such as:
- Water treatment and purification: pumping stations, pressure boosting stations, borehole pumps, lifting stations, aeration stations, compression, and drainage transportation.
- Oil and gas industry: submersible pumps, jack pumps, oil pipeline pumps, booster pumps, water injection pumps, regasification compressors.
- Oil refining: pumps, fans, compressors.
- Mining industry: flotation and coagulation, dewatering and filtration, mine pumps.
- Cement industry: pre-heating fans, flue gas fans, cooling exhaust fans, vertical roller mills, water supply pumps.
- Metallurgical industry: blast furnace fans, water distribution pumping system, exhaust fans, dust collector fans, coke ovens.
- Food industry: butter and dairy production (injection of distribution pipelines, dryers to obtain powdered milk, centrifugal pumps…), sugar production.
Schneider Altivar ATV630 Setting
Let's look at an example of setting up an ATV630 frequency converter for cascade control in multi-master mode. All inverters are equipped with the VW3A3721 option card.
The following parameters must be changed on each drive first:
- engine data + auto-tuning.
- basic settings (ACC, DEC, LSP, HSP).
- Macro configuration = booster control.
Next, you need to configure the PID controller:
- pressure control, feedback on AI2.
- pressure sensor measuring range (0-10 bar).
- internal pressure setpoint 3.5 bar (for example), scaling parameters PIF1, PIF2, PAL, PAH, PIP1, PIP2.
After that setup cascade mode:
- [M/P Speed Mode] MPSt = distributed mode - additional pumps are connected one at a time and operate at a fixed speed.
- connection / disconnection conditions.
- the first drive is master (MPDT=master). Second and third IF - MPDT="master or slave".
The settings for the second and third IF are the same as for the first, except:
second IF MGID=2, third IF MGID=3.
The inverters must have different IP addresses (VW3A3721)
Comments on the connection diagram:
- All drives must receive a pressure feedback signal at input AI2 (for example). You can use three pressure sensors (each connected to its own drive) or distribute the feedback signal from one pressure sensor to three drives using a splitter.
- The Ethernet cable must be connected to the VW3A3721 port (not the built-in embedded eth port). Daisy chain connection is possible - (Drive1.VW3A3721 - Drive2.VW3A3721.LeftRJ45, Drive2.VW3A3721.rightRJ45 - Drive3.VW3A3721). Please note that in this case, when power supply 2 of the FC is removed, communication between FC 1 and FC 3 is not possible. It is better to use a switch and connect the inverter in a star topology through a switch.
- All drives must receive a START command. Activation sequence START on the FC: first on the FC-slave, then on the master.
ATV 630 Types
Depending on execution, Altivar Process drives are offered in a few variants according to the type of mounting and with the different protection degrees:
- Drives for a wall mounting with protection class IP 21, range of power from 0.75 kW to 110 kW (200/240 V), with the possibility of installation without shell, or with installation in the Cabinet.
- Drives for wall mounting, degree of protection IP 55, range of power from 0.75 kW to 90 kW (380/480 V), ready for operation in adverse conditions indoors or outdoors to reduce the length of motor cable. They can be equipped with Vario isolator.
- Floor standing drives, with protection degree IP 21 and IP 54, range of power from 110 kW to 315 kW (380/440 V), the complete device with minimal dimensions, has possibility of application in the ordinary or unfavorable environment conditions.
ATV 630 schneider drives optimize the consumption of electric power, diminishing the value of consumable network current. In addition, due to the function of "Stop&go" frequency converters Altivar630 reduce power consumption in standby mode up to 60% due to the automatically disabling of certain functions (power of the power unit, fans, illumination of the graphic display terminal, and other).
Also these drives are developed in accordance with the requirements of all European directives for the protection of the environment.
Eltra Trade company offer full power range of atv630 at the Best Price: 4kw, 22kw, 30kw, 75kw, 11kw, 7.5 kw, 55kw, 37kw, 110kw, 45kw.
Also you can choose any of model range: atv630c, atv630d, atv630u.
Contact our managers righ now to get more information!