Siemens Pressure sensors SITRANS P
IN STOCK!!!
3rh1921 1ca10 siemens
- Type: additional block contact
- Rated current: 6 A
- Rated voltage: 250 В
- Contact type: normally open (NO)
- Overload- pressure 400 mbar
- Output signal: 4 to 20 mA two-wire connection
- power supply DC 7 to 33 V without explosion protection
The Product is not Available now!
Check the Price with the manager.
Interface cover for operator panel
EMERGENCY STOP mushroom pushbutton
The 6DR4004-8V from Siemens is a mounting kit for SIPART PS2 positioners. This kit is intended for installation on NAMUR linear actuators.
SITRANS P210 TRANSMITTERS FOR PRESSURE AND ABSOLUTE PRESSURE FOR LOW-PRESSURE APPLICATIONS NON-LINEARITY: 0,25 PERCENT (TYPICALLY) WETTED PARTS MATERIAL: STAINLESS STEEL PLUS SEALING MATERIAL, NON-WETTED PARTS MATERIAL: STAINLESS STEEL MEASURING RANGE FOR GAUGE: 0 TO 250 MBAR, OVERLOAD- PRESSURE 1 BAR OUTPUT SIGNAL: 4 TO 20 MA TWO-WIRE CONNECTION, POWER SUPPLY DC 7 TO 33 V WITHOUT EXPLOSION PROTECTION ELECTRICAL CONNECTION: PLUG TO DIN EN 175301-803-A, THREAT FOR PACKED GLAND M16 (WITH CONNECTOR) PROCESS CONNECTION: G1/2", MALE TO EN 837-1 (1/2", BSP MALE) (STANDARD FOR METRIC PRESSURE RANGES MBAR, BAR) SEALING MATERIAL BETWEEN SENSOR AND HOUSING: VITON (FPM, STANDARD) STANDARD VERSION
SITRANS P210 TRANSMITTERS FOR PRESSURE AND ABSOLUTE PRESSURE FOR LOW-PRESSURE APPLICATIONS NON-LINEARITY: 0,25 PERCENT (TYPICALLY) WETTED PARTS MATERIAL: STAINLESS STEEL PLUS SEALING MATERIAL, NON-WETTED PARTS MATERIAL: STAINLESS STEEL MEASURING RANGE FOR GAUGE: 0 TO 400 MBAR, OVERLOAD- PRESSURE 1 BAR OUTPUT SIGNAL: 4 TO 20 MA TWO-WIRE CONNECTION, POWER SUPPLY DC 7 TO 33 V WITHOUT EXPLOSION PROTECTION ELECTRICAL CONNECTION: PLUG TO DIN EN 175301-803-A, THREAT FOR PACKED GLAND M16 (WITH CONNECTOR) PROCESS CONNECTION: G1/2", MALE TO EN 837-1 (1/2", BSP MALE) (STANDARD FOR METRIC PRESSURE RANGES MBAR, BAR) SEALING MATERIAL BETWEEN SENSOR AND HOUSING: VITON (FPM, STANDARD) STANDARD VERSION
SITRANS P210 TRANSMITTERS FOR PRESSURE AND ABSOLUTE PRESSURE FOR LOW-PRESSURE APPLICATIONS NON-LINEARITY: 0,25 PERCENT (TYPICALLY) WETTED PARTS MATERIAL: STAINLESS STEEL PLUS SEALING MATERIAL, NON-WETTED PARTS MATERIAL: STAINLESS STEEL MEASURING RANGE FOR GAUGE: 0 TO 600 MBAR, OVERLOAD- PRESSURE 3 BAR OUTPUT SIGNAL: 4 TO 20 MA TWO-WIRE CONNECTION, POWER SUPPLY DC 7 TO 33 V WITHOUT EXPLOSION PROTECTION ELECTRICAL CONNECTION: PLUG TO DIN EN 175301-803-A, THREAT FOR PACKED GLAND M16 (WITH CONNECTOR) PROCESS CONNECTION: G1/2", MALE TO EN 837-1 (1/2", BSP MALE) (STANDARD FOR METRIC PRESSURE RANGES MBAR, BAR) SEALING MATERIAL BETWEEN SENSOR AND HOUSING: VITON (FPM, STANDARD) STANDARD VERSION
SITRANS P220 Transmitters
The Product is not Available now!
Check the Price with the manager.
SITRANS P DS III, HART, 4-20 MA TRANSMITTER FOR DIFFERENTIAL PRESSURE AND FLOW PN 32/160 GAS 1/LIQUIDS 1 ART. 3.3 SEP MEASURING CELL FILLING SILICONE NORMAL CLEuropean Article NumberING SPAN: PN 32 (MWP 464 PSI): 1 TO 20 MBAR (0.4015 TO 8.03 INH2O), MAX. STATIC PRESSURE 32 BAR DIAPHRAGM STAINLESS STEEL PARTS OF MEASURING CELL STAINLESS STEEL PROCESS CONNECTION: 1/4-18 NPT MOUNTING THREAD: 7/16-20 UNF DIE-CAST ALUMINIUM HOUSING, PROCESS FLANGE BOLTS STAINLESS STEEL INTERNATIONAL DESIGN ENGLISH INSCRIPTION DOCUMENTATION AS CD ATEX (EX IA + EX D + ZONE 1D/2D) ELECTRIC CONNECTION AND CABLE INLET: CABLE GLAND M20 X1.5 HOUSING COVER WITH WINDOW
The Product is not Available now!
Check the Price with the manager.
SITRANS P DS III, HART, 4-20 MA TRANSMITTER FOR DIFFERENTIAL PRESSURE AND FLOW PN 32/160 GAS 1/LIQUIDS 1 ART. 3.3 SEP MEASURING CELL FILLING SILICONE NORMAL CLEuropean Article NumberING SPAN: PN 160 (MWP 2320 PSI): 1 TO 60 MBAR (0.4015 TO 24.09 INH2O), MAX. STATIC PRESSURE 160 BAR DIAPHRAGM STAINLESS STEEL PARTS OF MEASURING CELL STAINLESS STEEL PROCESS CONNECTION: 1/4-18 NPT MOUNTING THREAD: 7/16-20 UNF DIE-CAST ALUMINIUM HOUSING, PROCESS FLANGE BOLTS STAINLESS STEEL STANDARD DESIGN . WITHOUT EXPLOSION PROTECTION, ELECTRIC CONNECTION AND CABLE INLET: CABLE GLAND 1/2-14 NPT HOUSING COVER WITH WINDOW
The Product is not Available now!
Check the Price with the manager.
SITRANS P DS III, HART, 4-20 MA TRANSMITTER FOR DIFFERENTIAL PRESSURE AND FLOW PN 32/160 GAS 1/LIQUIDS 1 ART. 3.3 SEP MEASURING CELL FILLING SILICONE NORMAL CLEuropean Article NumberING SPAN: PN 160 (MWP 2320 PSI): 1 TO 60 MBAR (0.4015 TO 24.09 INH2O), MAX. STATIC PRESSURE 160 BAR DIAPHRAGM STAINLESS STEEL PARTS OF MEASURING CELL STAINLESS STEEL PROCESS CONNECTION: 1/4-18 NPT MOUNTING THREAD: 7/16-20 UNF DIE-CAST ALUMINIUM HOUSING, PROCESS FLANGE BOLTS STAINLESS STEEL INTERNATIONAL DESIGN ENGLISH INSCRIPTION DOCUMENTATION AS CD ATEX (EX IA + EX D + ZONE 1D/2D) ELECTRIC CONNECTION AND CABLE INLET: CABLE GLAND M20 X1.5 HOUSING COVER WITH WINDOW
The Product is not Available now!
Check the Price with the manager.
SITRANS P DS III / P410, PROFIBUS PA, transmitter
The Product is not Available now!
Check the Price with the manager.
SITRANS P DS III / P410, PROFIBUS PA, transmitter
The Product is not Available now!
Check the Price with the manager.
SITRANS P DS III, HART, 4-20 MA TRANSMITTER FOR DIFFERENTIAL PRESSURE AND FLOW PN 420 MEASURING CELL FILLING SILICONE OIL NORMAL CLEuropean Article NumberING SPAN 16 TO 1600 MBAR (6.424 TO 642.4 INH2O), MAX.STATIC PRESSURE 420 BAR DIAPHRAGM MADE OF STAINLESS STEEL, MEASURING CELL STAINLESS STEEL PROCESS CONNECTION: 1/4-18 NPT MOUNTING THREAD: M12 DIE-CAST ALUMINIUM HOUSING, PROCESS FLANGE SCREWS STAINLESS STEEL (PN 420) INTERNATIONAL DESIGN ENGLISH INSCRIPTION DOCUMENTATION AS CD WITHOUT EXPLOSION PROTECTION, ELECTRIC CONNECTION AND CABLE INLET: CABLE GLAND M 20X1.5 HOUSING COVER WITH WINDOW
The Product is not Available now!
Check the Price with the manager.
SITRANS P DS III, HART, 4-20 MA TRANSMITTER FOR LEVEL MEASURING CELL FILLING SILICONE OIL NORMAL CLEuropean Article NumberING SPAN 25 TO 250 MBAR (0.363 TO 3.63 PSI) DESIGN FOR REMOTE SEALS. NOTE: PLEASE ADD THE DELIVERY TIME OF THE REMOTE SEAL! PROCESS CONNECTION: 1/4-18 NPT SECURING THREAD: 7/16-20 UNF DIE-CAST ALUMINIUM HOUSING, PROCESS FLANGE BOLTS MADE OF STAINLESS STEEL INTERNATIONAL DESIGN ENGLISH INSCRIPTION DOCUMENTATION AS CD WITHOUT EXPLOSION PROTECTION, ELECTRIC CONNECTION AND CABLE INLET: CABLE GLAND M 20X1.5 WITHOUT VISIBLE DIGITAL INDICATOR (DIGITAL DISPLAY HIDDEN, SETTING: MA)
The Product is not Available now!
Check the Price with the manager.
SITRANS P DS III, HART, 4-20 MA TRANSMITTER FOR LEVEL MEASURING CELL FILLING SILICONE OIL NORMAL CLEuropean Article NumberING SPAN 25 TO 600 MBAR (0.363 TO 8.70 PSI) DESIGN FOR REMOTE SEALS. NOTE: PLEASE ADD THE DELIVERY TIME OF THE REMOTE SEAL! PROCESS CONNECTION: 1/4-18 NPT SECURING THREAD: M10 DIE-CAST ALUMINIUM HOUSING, PROCESS FLANGE BOLTS MADE OF STAINLESS STEEL STANDARD DESIGN WITHOUT EXPLOSION PROTECTION, ELECTRIC CONNECTION AND CABLE INLET: CABLE GLAND PG 13.5 (NOT WITH EXPLOSION PROOF) WITHOUT VISIBLE DIGITAL INDICATOR (DIGITAL DISPLAY HIDDEN, SETTING: MA)
The Product is not Available now!
Check the Price with the manager.
SITRANS P DS III, HART, 4-20 MA TRANSMITTER FOR LEVEL MEASURING CELL FILLING SILICONE OIL NORMAL CLEuropean Article NumberING SPAN 53 TO 1600 MBAR (0.77 TO 23.2 PSI) DESIGN FOR REMOTE SEALS. NOTE: PLEASE ADD THE DELIVERY TIME OF THE REMOTE SEAL! PROCESS CONNECTION: 1/4-18 NPT SECURING THREAD: M10 DIE-CAST ALUMINIUM HOUSING, PROCESS FLANGE BOLTS MADE OF STAINLESS STEEL INTERNATIONAL DESIGN ENGLISH INSCRIPTION DOCUMENTATION AS CD EXPLOSION PROTECTION EEX D ELECTRIC CONNECTION AND CABLE INLET: CABLE GLAND M 20X1.5 HOUSING COVER WITH WINDOW
SITRANS P TRANSMITTER COMPACT FOR PRESSURE AND ABSOLUT PRESSURE FOR FOOD, PHARMACEU- TICALS AND BIOTECHNOLOGY, WITH DIAPHRAGM FLUSH AT FRONT. 2-WIRE SYSTEM, PROCESS TEMPERA- TURE UP TO 140 DEG. CEL., ACCURACY 0.2 % OF F.S.V. OUTPUT SIGNAL: 4...20 MA, PROCESS CONNECTION: QUICK-RELEASE CONNECTION: CLAMP CONNECTION ACCORDING DIN 32676: DN 40 FILLING LIQUID: LIQUID FDA APPROVED OUTPUT SIGNAL : 4-20 MA HOUSING(STAINLESS STEEL1.4404)/ ELECTRICAL CONNECTION: HOUSING WITH ANGELD PLUG ACCORDING DIN 43650, IP65 MEASURING RANGE: 0...160 MBAR OVERLOAD PRESSURE: 2 BAR WITHOUT EXPLOSION PROTECTION
SITRANS P TRANSMITTER COMPACT FOR PRESSURE AND ABSOLUT PRESSURE FOR FOOD, PHARMACEU- TICALS AND BIOTECHNOLOGY, WITH DIAPHRAGM FLUSH AT FRONT. 2-WIRE SYSTEM, PROCESS TEMPERA- TURE UP TO 140 DEG. CEL., ACCURACY 0.2 % OF F.S.V. OUTPUT SIGNAL: 4...20 MA, PROCESS CONNECTION: QUICK-RELEASE CONNECTION: CLAMP CONNECTION ACCORDING DIN 32676: DN 40 FILLING LIQUID: LIQUID FDA APPROVED OUTPUT SIGNAL : 4-20 MA HOUSING(STAINLESS STEEL1.4404)/ ELECTRICAL CONNECTION: HOUSING WITH ANGELD PLUG ACCORDING DIN 43650, IP65 MEASURING RANGE: 0...400 MBAR OVERLOAD PRESSURE: 6 BAR WITHOUT EXPLOSION PROTECTION
SITRANS P TRANSMITTER COMPACT FOR PRESSURE AND ABSOLUT PRESSURE FOR FOOD, PHARMACEU- TICALS AND BIOTECHNOLOGY, WITH DIAPHRAGM FLUSH AT FRONT. 2-WIRE SYSTEM, PROCESS TEMPERA- TURE UP TO 140 DEG. CEL., ACCURACY 0.2 % OF F.S.V. OUTPUT SIGNAL: 4...20 MA, PROCESS CONNECTION: QUICK-RELEASE CONNECTION: CLAMP CONNECTION ACCORDING DIN 32676: DN 40 FILLING LIQUID: LIQUID FDA APPROVED OUTPUT SIGNAL : 4-20 MA HOUSING(STAINLESS STEEL1.4404)/ ELECTRICAL CONNECTION: HOUSING WITH ANGELD PLUG ACCORDING DIN 43650, IP65 MEASURING RANGE: 0...6 BAR OVERLOAD PRESSURE: 30 BAR WITHOUT EXPLOSION PROTECTION
The Product is out of Production!
Contact the manager for more information.
- motorized op. mech. with stored energy mech.
- 24V AC/DC
The Product is not Available now!
Check the Price with the manager.
Diaphragm seal flanged for transmitter SITRANS P
The Product is out of Production!
Contact the manager for more information.
ACCESSORIES FOR VT160 MOTORIZED OP. Mechanism 230V AC / 220V DC
SITRANS P pressure transmitter guarantees metering precision, longevity and particularly for technically progressive usability. But being tech-savvy also has its responsibilities. That's why Siemens developed a new version of the device that also offers reliable self-diagnostics equipment inspection and self-control, fault diagnostics for measurements exceeding critical ones, signaling the need for calibration, and many other "monitoring functions".
Siemens SITRANS P ranges involves numeric tension senders for dimension measure stress, perfect push, increment tension, flux and degree. Even norm arrangements suggest all-round diagnostic and analog functions with tall security.
A push transducer is an instrument which physical parameters change depending on the pressure of the medium being measured. In sensors, the pressure of the measured medium is converted into a unified pneumatic, electrical digital code or signals.
SITRANS P is a transmitter for metering differential pressure, degree and stream with the sovereign precision. It warranties extremely low impact of statical push and temperature on the metering outcome. The big long-distance fixity of the actuator decreases service spending owing to durable calibration gaps and guarantees big safety of dimension results over long periods of time.
SITRANS P operation Principle
Working principle consists in metering the tension distinction betwixt two cavities - plus and minus. They can be used for flow metering, with the help of narrowing devices. The narrowing device in the pipeline is a local resistance, passing through which the nature of the flow changes.
Advantages:
- Improved control of your systems thanks to extremely fast response times.
- The transmitter can be easily configured and operated from a monitoring scheme applying the HART protocol.
- A large number of diagnostic functions can be used without software connection.
- The display can even show graphs and diagrams of parameter changes for easy process monitoring.
- Comprehensive diagnostics such as 8 min and max process value recorders that also show when the event occurred.
Application area
SITRANS P models can be used in branches with extremity chemical and mechanical voltage. Due to their electromagnetic compatibility, they are suitable for places with high electromagnetic radiation.
Other excellences:
- Ameliorated operation check with advanced diagnostics and simulations
- Maximum communication security down to control level with PROFIsafe version
- Possibility to use the simulation function for contour check functions
Forward sender diagnostics with pressure transmitter indicates:
- Double expired time registers. These can be install to call when preclusive service
- Three naturally controllable scopes. That denote you can realize pre-alarms and/or check the temperature.
- A notation of the scope disturbances. Based on maximum indicators for min./max. values for inlet push, actuator temperature and electronic temperature. The note ensures info on the condition of the new SITRANS P, on the act and on the encircling temperature.
- Malingering purpose. Inclusion the sender electronics and the whole hinge to be checked immediately after the actuator, e.g. for chain launch. This ensures significant data on whether the sender electronics are in correct course, at what tension the pales react and whether the regulator noose is operating right and all the displays are work, etc.
- Easy plug-out/plug-in exchange of imperfect details. Even on-site – if the arrangement calls an infelicity in the electronics or metering element; no recalibration necessary.
You can buy Siemens 7MF at the best price in Eltra Trade web store.