Siemens SITOP PSE200U | PSE202U add-on modules

  • Input: DC 24 V/12 A
  • Output: 24 V DC/4x 3 A
  • Level adjustable 0.5-3 A mit status message for each output
  • Input: 24 V DC/40 A
  • Output: 24 V DC/4x 10 A
  • Threshold value adjustable 2-10 A
  • With monitoring interface

SITOP select Diagnostics module (4-channel)

  • Input: 24 V DC/40 A
  • Output: 24 V DC/4x 10 A
  • Level adjustable 2-10 A

SITOP PSE200U 3 A Selectivity module 4-channel

  • Input: DC 24 V/12 A
  • Output: 24 V DC/4x 3 A
  • Level adjustable 0.5-3 A
  • With common signaling contact

SITOP PSE200U 10 A Selectivity module 4-channel

  • Input: 24 V DC/40 A
  • Output: 24 V DC/4x 10 A
  • Level adjustable 3-10 A
  • With common signaling contact
SITOP PSE200U 10 A Selectivity module 4-channel
  • Input: 24 V DC/40 A
  • Output: 24 V DC/4x 10 A
  • Level adjustable 3-10 A mit status message for each output

SITOP PSE200U 10 A Selectivity module 4-channel
  • input: = 24 V,
  • output: = 24 V / 3 A per channel,
  • output with current setting 0.5-3 A

SITOP select Diagnostics module (4-channel)

  • input: 24 VDC, 
  • output: 24 VDC / 3 A 
  • per channel, 0.5-3 A adjustable current output with channel status messages

      SITOP PSE202U Redundancy module

      • Input/output: 24 V DC/40 A
      • Suitable for decoupling two SITOP power supplies with maximal per 20 A output current

      SITOP PSE202U NEC Class 2 Redundancy module

      • Input/output: 24 V DC suitable for decoupling two SITOP power supplies
      • Output power restricted to 100 VA

      SITOP PSE202U 10A Redundancy module

      • Input/output: 24 V DC
      • Suitable for decoupling two SITOP power supplies with maximal per 5 A output current

      SITOP RED1200 redundancy module

      • Input/output: 24/48 V DC/20 A
      • Suitable for decoupling two SITOP power supplies with max. 10 A output current each

      SITOP RED1200 redundancy module

      • Input/output: 24/48 V DC/40 A
      • Suitable for decoupling two SITOP power supplies with max. 20 A output current each

      SITOP SEL1400 10 A Selectivity module 4-channel with limiting characteristic

      • Input: 24 V DC/40 A
      • Output: 24 V DC/4x 10 A
      • Threshold value adjustable 2-10 A
      • With monitoring interface

      SITOP SEL1400 5 A Selectivity module 8-channel with limiting characteristic

      • Input: 24 V DC/40 A
      • Output: 24 V DC/8x 5 A
      • Threshold adjustable 1-5 A
      • With monitoring interface

      SITOP SEL1200 5 A Selectivity module 8-channel with switching characteristic

      • Input: 24 V DC/40 A
      • Output: 24 V DC/8x 5 A
      • Threshold adjustable 1-5 A
      • With monitoring interface

      SITOP SEL1400 10 A Selectivity module 8-channel with limiting characteristic

      • Input: 24 V DC/60 A
      • Output: 24 V DC/8x 10 A
      • Threshold adjustable 2-10 A
      • With monitoring interface

      SITOP SEL1200 Selectivity module 8-channel switching characteristic

      • Input: 24 V DC/60 A
      • Output: 24 V DC/8 x 10 A
      • Level adjustable 2-10 A
      • With monitoring interface

      Siemens psu200u and psu202u modules photoAdd-on modules by SITOP are your best solution for solving different problems while working process. We have two of them to your choice:

      • PSE 200U Selectivity Module
      • PSE 202U Redundancy Module

      To make your electronics working with no failures it is important to supply it with current permanently and to diagnose overloads or short circuits rapidly. All this is possible with 4-channel selectivity module PSE 200U by Siemens.

      That product from the add-on module series SITOP can perform fast diagnostics of current overloads and short-circuits of your 24V DC system. After a power loss or short-circuit was detected it performs disconnection with its selectivity module of a single circuit while other loads work further. Diagnostics is performed via signaling contact or signaling of each channel separately.

      A redundant configuration of another add-on module SITOP 202U allows to connect two power supply units to one automated piece of equipment. Such a solution provides high-reliability of power supplying. While one of the power modules can failure another will be working correctly providing necessary load. You will be aware of the unstable power supply with PSE 202U redundancy module’s LED contacts. One more merit is a perfectly developed circuit protection that was designed to fix emergently variety of hazards on the primary and secondary sides. Keep your equipment safe and durable with SITOP PSE 202U redundancy modules.