Univer Pneumatic Solenoid spool valve
CM threaded spool valves 3/2 - 5/2 - 5/3
CM threaded spool valve
Solenoid Valve
Valve G1/8-G1/4.
| Solenoid Valve |
valve G1/8-G1/4.
valve G1/8-G1/4.
valve G1/8-G1/4.
valve G1/8-G1/4.
Valve with Electrical impulse
Valve with Threaded body G1/8.
Valve with Electrical impulse
univer gl6140
- Body: aluminum, brass, stainless steel
- Seals: NBR, FKM, EPDM
- Spring: stainless steel
valve G1/8-G1/4.
valve G1/8-G1/4.
valve G1/8-G1/4.
valve G1/8-G1/4.
valve G1/8-G1/4.
valve G1/8-G1/4.
Valve with Electrical impulse
Solenoid valve
valve G1/8-G1/4.
valve G1/8-G1/4.
valve G1/8-G1/4.
COMPA 2/COMPA 4 Miniature valves.
Spool valve is a device that directs the flow of liquid or gas by shifting the movable part relative to the windows on the surface on which it slides.
What is solenoid spool valve?
Solenoid unit is an electromechanical device designed to regulate the flow of all types of liquids and gases. It consists of a housing, a solenoid with a core, on which a disk or piston is installed that regulates the flow.
Spool control valve operation principle
The pneumatic air deliver is close to the intake hole 1.
Port 2 is coupled to the pneumatic topper extension cable connection.
Port 3 is not connected because it is an exhaust port.
In the standard condition, out of the drive engaged, nothing will happen, since coil physically freezes the air torrent in channel 1, and the cylinder is retracted because channels 2 and 3 are connected due to the position of the spool. Thus, any air already in the system will getaway in the atmosphere across the discharge hole. View it a " ordinary " or "resting condition."
Currently fancy that we are working with a drive. We would see how the position of the spool changes, and the barrel expands. Inasmuch as the spool dislocated to the unlock position of slot 1 and at the same time blocked slot 3, which caused airflow from port 1 to port 2 while blocking the release. This is called a " going condition."
The barrel will stay expanded before the bobbin returns to its normal position, either by second starter at the over against end of the unit or by means of an domestic spring return. By this illustration, this kind of device would be noted as a 3/2 valve (three by two) because we have 3 ports and 2 spool positions.
Solenoid valve operation
At rest, the plunger closes a small hole. An electrical toque across the bobbin builds a magnetic area. The magnetic range screws force on the plunger, as a result, the plunger pulls to the center of the coil so that the hole opens.
Application
Conventional solenoid spool valves switch very quickly. This can lead to switching shocks in the hydraulic system, which can lead to mechanical wear, as well as negatively affect the mode of operation. Soft switching valves slow down and dampen switches and protect the system. Optimal results are achieved when all 4 connections are connected and the valve is properly ventilated.
Univer Spool Valves
The main series of Univer miniature pneumatic valves:
CL/CM Threaded spool valves “UNIVERSAL” 3/2 - 5/2 - 5/3
- modular System UNIVERSAL type;
- suitable for vacuum application;
- control: domestic, power-driven, pneumatic, electric;
- Spool system with high flow rate;
- high cycle life;
- modular sub-bases.
E miniature pneumatic valve COMPA 2
- compact design (body is only 15 mm);
- original Univer spool system valued for decades;
- variety of manual panels operators.
F compact solenoid valve COMPA 4
- modular system and small dimensions;
- high flow rate;
- response time is very quick.
G-6 valves, 20 mm, G1/8
- version with spool system and integrated electrical and esternal connection;
- small design;
- high flow rate;
- versions available in sizes: 5/3, 5/2, 3/2+3/2/
GL-6 valves for base assembly, 20 mm, G1/8
- valve body is intended for base assembly;
- series has integrated outside electrical connection;
- tight design;
- high stream pace G-7.
G-7 26 mm G1/8 solenoid valves
- aluminium multiple sub-base;
- threaded valve body size G 1/8;
- versions available in 5/2-5/3;
- aluminum multiple sub-base.
PS COMBOBOX valves
- integrated sub-base in valve body;
- manifolds 2 … 20 valve positions;
- pneumatic/electric control;
- electrical and pneumatic monitoring;
- electric connect: outer - multipolar - seriated communications;
- different pressures (vacuum included);
- electrical connection: external - multipolar - serial connections.
You can buy full range of spool control valves from Univer company just by contacting our managers.