Baumer GXP6W - Interbus
Absolute encoders
Voltage supply | 10...30 VDC |
Reverse polarity protection | Yes |
Consumption w/o load | ≤60 mA (24 VDC) |
Operating temperature | -25...+85 °C -40...+85 °C (optional) |
- Overview
- Comments
Number of turns | ≤4096 / 12 bit |
Rotor moment of inertia | 20 gcm² |
Initializing time typ. | 50 ms after power on |
Transmission rate | 500 kBaud |
Shaft type | ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) |
Output stages | RS485 |
Sensing method | Optical |
Consumption w/o load | ≤60 mA (24 VDC) |
Voltage supply | 10...30 VDC |
Absolute accuracy | ±0.025 ° |
Code | Gray or binary |
Programmable parameters | Total resolution Rotating direction and code Preset and offset Zero point setting |
Size (flange) | ø58 mm |
Profile conformity | Encoder profile 71 |
Code sequence | CW default, programmable |
Interface | Interbus |
Resistance | DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms |
Steps per turn | ≤8192 / 13 bit |
Materials | Housing: aluminium Flange: aluminium |
manufacter SKU | GXP6W - Interbus |
Function | Multiturn |
Approval | UL approval / E63076 |
Weight approx. | 600 g |
Admitted shaft load | ≤20 N axial ≤40 N radial |
Protection DIN EN 60529 | IP 54 (without shaft seal) IP 65 (with shaft seal) |
Flange | Clamping or synchro flange |
Interference immunity | DIN EN 61000-6-2 |
Starting torque | ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) |
Emitted interference | DIN EN 61000-6-4 |
Operating speed | ≤10000 rpm (mechanical) ≤6000 rpm (electric) |
Operating temperature | -25...+85 °C -40...+85 °C (optional) |
Connection | Connector M23, 2 x 9-pin |
Reverse polarity protection | Yes |
Relative humidity | 95 % non-condensing |
People also buy
Comments
No comments yet