Sick FFUS15-1G1SR
Temperature and Flow sensors
- Flow sensor for conductive and non-conductive liquids
- Compact design with no moving parts
- Process temperature up to 80 °C, process pressure up to 16 bar
Item Number:
FFUS15-1G1SR
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Specification:
Part Number | 6043744 |
Process pressure: | Max. 16 bar |
Lower signal level: | 3.8 mA ... 4 mA |
Outlet zone: | 5 cm |
Signal voltage LOW: | ≤ 2 V |
Enclosure rating: | IP 67 |
Signal voltage HIGH: | Vs - 2 V |
Wetted parts: | PSU |
Protection class: | III |
Capacitive load: | 100 nF |
Medium: | Fluids |
Initialization time: | ≤ 5 s |
Output load: | < 500 Ohm |
Nominal width measuring tube: | NW 15 |
Inlet zone: | 30 cm |
Minimim flow: | 0.9 l/min |
Inductive load: | 1 H |
Ripple: | ≤ 5 Vpp |
Output signal: | Analog output: 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature 2 pulse/status output: transistor output for flow rate meter, empty pipe detection, flow monitoring 1 digital input for dosing and counter reset |
Conductivity: | No limitation |
Connection type: | Round connector M12 x 1, 8-pin |
Process connection: | G ¾ |
Output current: | < 100 mA |
Housing material: | PSU |
Response time: | Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s |
Impuls/frequency output: | 0 kHz ... 10 kHz |
Weight: | 350 g |
Ambient temperature operation: | 0 °C ... +60 °C |
Upper signal level: | 20 mA ... 20.5 mA |
Puls width: | ≤ 1 s |
Supply voltage: | 18 V DC ... 30 V DC |
Process temperature: | 0 °C ... +80 °C |
Repeatability: | ≤ 0.5 % |
Resolution: | 0.006 l/min |
Power consumption: | ≤ 180 mA |
Ambient storage temperature: | -20 °C ... +70 °C |
Accuracy of sensor element: | 2 % (of final value) |
Maximum flow: | 36 l/min |
People also buy
Comments
No comments yet