ABB PSE210-600-70-1

PSE Soft starter

ABB PSE Soft Starter PSE210-600-70-1. Product Code:1SFA897112R7000

Datasheet:

• Rated Operational Voltage:208 … 600 V AC
• Rated Control Supply Voltage (Us):100 ... 250 V AC
• Rated Control Circuit Voltage (Uc):DC Operation 24 V
• Rated Frequency (f):Main Circuit 50/60 Hz
• Control Supply 50/60 Hz
• Rated Operational Power - In-Line Connection (Pe):(230 V) 59 kW
• (400 V) 110 kW
• (500 V) 132 kW
• Rated Operational Current - In-Line Connection (Ie):210 A
• Service Factor Percentage:100 %
• Overload Protection:Build-in electronic overload protection
• Integrated Electronic Overload:Yes
• Adjustable Rated Motor Current Ie:30 ... 100 %
• Starting Capacity at Maximum Rated Current Ie:4xIe for 10s
• Ramp Time:During Start 1 ... 30 second [unit of time]
• During Stop 0 ... 30 second [unit of time]
• Initial Voltage During Start:30 ... 70 %
• Step Down Voltage Special Ramp:No %
• Current Limit Function:1.5 … 7xIe
• Switch for Inside Delta Connection:No
• Run Signal Relay:Yes
• By-pass Signal Relay:Yes
• Fault Signal Relay:Yes
• Overload Signal Relay:Yes
• Analog Outputs:4…20 mA
• Signal indication completed start ramp (LED):Green
• Signal indication ready to start/standby ON (LED):Green
• Signal indication running R (LED):Green
• Signal indication ramping up/down (LED):Green
• Signal indication protection (LED):Yellow
• Signal indication fault (LED):Red
• Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time:10
• Communication:FiledBusPlug(Optional)
• Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00
• Terminal Type:Main Circuit: Bars
• Connecting Capacity Main Circuit:Hole Diameter 10.2 mm
• Width and Thickness 20x5 mm
• Connecting Capacity Control Circuit:Rigid 1x2.5 mm²
• Rigid 2x1.5 mm²
• Connecting Capacity Supply Circuit:Rigid 1x2.5 mm²
• Rigid 2x1.5 mm²
• Tightening Torque:Main Circuit 28 N·m
• Supply Circuit 0.5 N·m
• Control Circuit 0.5 N·m
• Product Main Type:PSE210