ABB PSTX470-690-70 PSTX Soft starter

ABB PSTX470-690-70
Item Number: PSTX470-690-70
  • Softstarter
  • Product Code: 1SFC132081M0201
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments

    Softstarter Product Code: 1SFC132081M0201

    SPECIFICATION:

    Rated Operational Voltage: 208 … 600 V AC

      Rated Control Supply Voltage (Us): 100 … 250 V AC

        Rated Control Circuit Voltage (Uc): DC Operation 24 V

          Rated Frequency (f): Main Circuit 50/60 Hz

            Rated Operational Power - In-Line Connection (Pe): (230 V) 12.5 kW; (400 V) 22 kW; (500 V) 25 kW

              Rated Operational Current - In-Line Connection (Ie): 45 A

                Rated Operational Power - Inside Delta Connection: at 230 V 25 kW; at 400 V 37 kW; at 500 V 45 kW

                  Rated Operational Current - Inside Delta Connection: 76 A

                    Service Factor Percentage: 100 %

                      Overload Protection: Build-in electronic overload protection

                        Integrated Electronic Overload: Yes

                          Adjustable Rated Motor Current Ie: 30 ... 100 %

                            Starting Capacity at Maximum Rated Current Ie: 4xIe for 10s

                              Ramp Time: 1 ... 120 second [unit of time]

                                Initial Voltage During Start: 10 ... 99 %

                                  Step Down Voltage Special Ramp: 100 ... 10 %

                                    Current Limit Function: 1.5 … 7.5 xle

                                      Switch for Inside Delta Connection: Yes

                                        Run Signal Relay: Yes

                                          By-pass Signal Relay: Yes

                                            Fault Signal Relay: Yes

                                              Overload Signal Relay: Yes

                                                Analog Outputs: 0…10 V, 0…20 mA, 4…20 mA

                                                  Communication: Built in Modbus interface, Anybus, FieldBusPlug (with adapter).

                                                    Degree of Protection: acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00

                                                      Terminal Type: Cable Clamp

                                                        Connecting Capacity Main Circuit: Hole Diameter 8.5 mm

                                                          Connecting Capacity Control Circuit: Rigid 1x2.5 mm²

                                                            Connecting Capacity Supply Circuit: Rigid 1x2.5 mm²

                                                              Tightening Torque: Main Circuit 8 N·m

                                                                Product Main Type: PSTX45

                                                                Comments

                                                                No comments yet

                                                                Write a comment

                                                                People also buy