Baumer BDH

Incremental encoder

The Baumer BDH is a series of incremental encoders that provide precise measurement of rotations and displacements. They are used in various industrial applications where high accuracy and reliability are required.

Datasheet

Electrical specifications:

• Supply voltage: 5 VDC ±10%, 10...30 VDC, 4.5...30 VDC
• Typical consumption:
• 80 mA (5 VDC no load)
• 60 mA (24 VDC without load)
• 180 mA (4.5 VDC without load)
• Number of pulses per revolution: 10 ... 5000
• Counting signal: Zero pulse, 90° width
• Measurement method: Optical
• Output frequency:
• ≤200 kHz (24K)
• ≤300 kHz (05A/25W)
• Output signals: A 90° B, N + inverted
• Output stages: Antivalent, push-pull short-circuited, push-pull antivalent short-circuited
• Immunity to interference: EN 61000-6-2
• Radiated interference: EN 61000-6-3
• Approvals: UL approval / E217823

Mechanical design:

• Size (flange): ø55 mm
• Shaft type: ø10 mm solid shaft (mounting flange)
• Permissible shaft load:
• ≤40 N on the axis
• ≤60 N at the radius
• Flange type: Mounting flange
• Protection according to EN 60529:
• IP 42
• IP 65
• Operating speed:
• ≤12000 rpm (IP 42)
• ≤6000 rpm (IP 65)
• Passing torque:
• 0.022 Nm (IP 42)
• 0.026 Nm (IP 65)
• Body material:
• Steel
• Aluminum (connection -A)
• Flange: Aluminum
• Operating temperature: -20...+85 °C
• Relative humidity: 95 % without condensation
• Vibration: 10 g, 10-200 Hz
• Shock: 50 g, 11 ms
• Connector: M23, 12-pin cable 2 m
• Weight: approx. 300 g