Baumer BHG 16

Blind hollow shaft

The BHG 16 is an incremental encoder from Baumer that is used to accurately measure angular position and rotational speed. This encoder has an optical reading method and is available with a blind or through hollow shaft with a diameter of 12 mm.

Datasheet:

• Supply voltage: 5 VDC ±10%, 10...30 VDC, 4.5...30 VDC
• Current consumption: 80 mA (5 VDC, no load), 180 mA (4.5 VDC, no load), 60 mA (24 VDC, no load)
• Pulses per revolution: 10 ... 5000
• Reference signal: Zero pulse, 90° width
• Output signal frequency: ≤750 kHz
• Output signals: A 90° B, N + inverted
• Output stages: Antivalent, push-pull with short circuit protection
• Interference resistance: EN 61000-6-2
• Radiated interference: EN 61000-6-3
• Protection: EN 60529 IP 42, IP 65
• Rotation speed: ≤12000 rpm (IP 42), ≤6000 rpm (IP 65)
• Material: Housing - aluminum, flange - aluminum
• Operating temperature: -20...+85 °C
• Relative humidity: 95 % without condensation
• Vibration resistance: EN 60068-2-6, 10 g, 10-200 Hz
• Impact resistance: EN 60068-2-27, 50 g, 11 ms
• Connection: M23 connector, 12-pin, 2 m cable
• Weight: approx. 300 g

Advantages:

• High accuracy: Thanks to the optical reading method and the ability to adjust up to 5000 pulses per revolution.
• Durability and reliability: Aluminum housing and flange ensure durability and resistance to mechanical stress.
• Flexible installation: A variety of mounting accessories and connections are available.
• Resistance to external influences: High level of protection against dust and moisture (IP 65) and resistance to vibrations and shocks