Baumer BMMS K50 analog / cable-pull - MAGRES redundant

Analog output / redundant

The BMMS K50 analog is a cable transducer from Baumer used for linear position feedback. It has a magnetic reading method and provides high accuracy and reliability in various industrial applications.

Datasheet:

• Power supply: 8...30 VDC
• Reverse polarity protection: Yes
• Short circuit protection: Yes
• Consumption: 35 mA (24 VDC, no load)
• Initialization time: ≤500ms after power-on
• Response time: < 1 ms
• Interface: Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bits
• Function: Linear position feedback
• Linearity: ±0.65% of full range (f.s.r.)
• Absolute accuracy: ±1.13 % f.s.o. (+25 °C), ±1.41 % f.s.o. (-40...+85 °C)
• Reading method: Magnetic
• Repeatability: 5 mm
• Immunity to interference: EN 61000-6-2
• Radiated interference: EN 61000-6-4
• Programmable parameters: Learning measurement range
• Diagnostic function: Self-diagnosis
• Output voltage reading: Factory setting
• Protection: IP 65 (encoder)
• Material: Encoder body – aluminum, cable transducer body – PA6 GF30, cable – stainless steel, coated with polyamide
• Operating temperature: -40...+85 °C
• Life: Typically >500,000 cycles
• Measuring length: 5 m
• Cable acceleration: ≤50 m/s²
• Cable diameter: 0.61 mm
• Retraction force: >3 N
• Pulling force: ≤9 N
• Relative humidity: 95% temporarily condensing
• Resistance: EN 60068-2-6 (vibration 10 g, 10-2000 Hz), EN 60068-2-27 (shock 50 g, 11 ms)
• Weight: Approximately 400 g
• Connection: M12 flange connector, 5-pin or 8-pin, 2 m cable
• Bending radius: Cable: >55 mm