Baumer EIL580-T - through hollow shaft - Option 6301 Incremental encoders
Item Number: EIL580-T - through hollow shaft - Option 6301
| Voltage supply | 5 VDC ±5 % 8...30 VDC 4.75...30 VDC |
| Reverse polarity protection | Yes |
| Short-circuit proof | Yes (HTL) Yes (TTL, max. 1 s and 1 signal) |
| Operating temperature | -40...+85 °C |
- Overview
- Datasheet
- Alternative numbers
- Comments
| Reverse polarity protection | Yes |
| Weight approx. | 300 g |
| Protection DIN EN 60529 | IP 65 (without shaft seal) IP 67 (with shaft seal) |
| Relative humidity | 90 % non-condensing |
| Operating temperature | -40...+85 °C |
| Interference immunity | DIN EN 61000-6-2 |
| Scan ratio | 40...60 % |
| Connection | Flange connector M12, 8-pin Flange connector M23, 12-pin Cable |
| Reference signal | Zero pulse, width 90° ±10 % |
| EIL580-T - through hollow shaft - Option 6301 output signals | A+, B+, R+, A-, B-, R- |
| Output frequency | ≤300 kHz (TTL) ≤160 kHz (HTL) |
| Materials | Housing: aluminium die-cast Flange: aluminium |
| Motor shaft tolerance | 0.2 mm axial 0.03 mm radial |
| Voltage supply | 5 VDC ±5 % 8...30 VDC 4.75...30 VDC |
| Output stages | TTL/RS422 HTL/push-pull |
| Sensing method | Optical |
| Emitted interference | DIN EN 61000-6-3 |
| manufacter SKU | EIL580-T - through hollow shaft - Option 6301 |
| Resistance | DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 250 g, 6 ms |
| Size (flange) | ø58 mm |
| Shaft type | ø8...15 mm (through hollow shaft) |
| Pulses per revolution | 100...5000 |
| Consumption w/o load | ≤70 mA |
| Phase shift | 90° ±10° |
| Approval | UL 508 / CSA 22.2 |
| Short-circuit proof | Yes (HTL) Yes (TTL, max. 1 s and 1 signal) |
Comments
No comments yet