Baumer EIL580-TT10

Through Hollow Shaft

The EIL580-TT10 incremental encoder is a discrete shaft rotation angle sensor that generates a normalized electrical pulse for each defined rotation angle increment. With continuous rotation of the shaft, a sequence of pulses occurs, containing information about the relative angle of rotation and speed of rotation.

Technical Data

• Supply voltage: 5 VDC ±5 %, 8...30 VDC, 4.75...30 VDC
• Reverse polarity protection: Yes
• Short-term protection: Yes (HTL), Yes (TTL, max. 1 s and 1 signal)
• No-load consumption: ≤70 mA
• Pulses per revolution: 100 ... 5000
• Phase shift: 90° ±10°
• Duty cycle: 40...60%
• Reference signal: Zero pulse, width 90° ±10 %
• Output signal frequency: ≤300 kHz (TTL), ≤160 kHz (HTL)
• Output signals: A+, B+, R+, A-, B-, R-
• Output stages: TTL/RS422, HTL/push-pull
• Interference immunity: EN 61000-6-2
• Radiated interference: EN 61000-6-3
• Shaft type: ø8...15 mm (through hollow shaft)
• Protection: IP 65 (without shaft seal), IP 67 (with shaft seal)
• Rotation speed: ≤3000 rpm (+20 °C, IP 67), ≤6000 rpm (+20 °C, IP 65)
• Starting torque: ≤0.025 Nm (+20 °C, IP 65), ≤0.03 Nm (+20 °C, IP 67)
• Material: Body: die-cast aluminum, Flange: aluminum
• Operating temperature: -40...+85 °C
• Relative humidity: 90% non-condensing
• Resistance: Vibration 30 g, 10-2000 Hz, Shock 250 g, 6 ms
• Connection: Flange connector M12, 8-pin, Flange connector M23, 12-pin, Cable
• Weight: about 300 g.