Baumer EIL580P-B - optoPulse

Industrial incremental encoder

Industrial encoders incremental 58 mm precise optical with blind hollow shaft

The EIL580P-B is an incremental encoder from Baumer, featuring precise optical sensing and a blind hollow shaft design. It is known for its high resolution and reliability, making it suitable for a wide range of industrial applications.

Datasheet:

• Voltage Supply: 4.75...30 VDC
• Reverse Polarity Protection: Yes
• Short-Circuit Proof: Yes
• Consumption w/o Load: ≤70 mA
• Initializing Time: ≤30 ms after power on
• Pulses per Revolution: 1...65536
• Duty Cycle: 45...55 % typical at 1024, 2048 ppr
• Reference Signal: Zero pulse 90° or 180°
• Sensing Method: Optical
• Output Frequency: ≤300 kHz (TTL), ≤160 kHz (HTL)
• Output Signals: A+, B+, R+, A-, B-, R-
• Output Stages: TTL/RS422, HTL/push-pull
• Programmable Parameters:
• Output level TTL/HTL
• Pulse number 1...65536
• Zero pulse width 90°/180°
• Zero pulse position
• Signal sequence
• Interference Immunity: EN 61000-6-2
• Emitted Interference: EN 61000-6-3
• Approval: UL 508 / CSA 22.2

Technical Data - Mechanical Design

• Size (Flange): ø58 mm
• Shaft Type: ø8...15 mm (blind hollow shaft), ø9.52 mm (blind hollow shaft), ø12.7 mm (blind hollow shaft)
• Protection EN 60529: IP 65 (without shaft seal), IP 67 (with shaft seal)
• Operating Speed: ≤6000 rpm (+20 °C, IP 67), ≤8000 rpm (+20 °C, IP 65)
• Starting Torque: ≤0.02 Nm (+20 °C, IP 65), ≤0.025 Nm (+20 °C, IP 67)
• Material: Housing: aluminium die-cast, Flange: aluminium
• Operating Temperature: -40...+100 °C
• Relative Humidity: 90 % non-condensing
• Resistance:
• EN 60068-2-6 Vibration 30 g, 10-2000 Hz
• EN 60068-2-27 Shock 250 g, 6 ms
• Connection: Flange connector M12, 8-pin, Flange connector M23, 12-pin, Cable
• Weight: Approx. 300 g