Baumer EIL580P-SY - optoPulse Incremental Solid Shaft Encoder
Item Number: EIL580P-SY - optoPulse
Incremental encoder with synchro flange
| Voltage supply | 4.75...30 VDC |
| Reverse polarity protection | Yes |
| Short-circuit proof | Yes |
| Operating temperature | -40...+100 °C |
- Overview
- Datasheet
- Alternative numbers
- Comments
In stock!!!
Incremental Solid shaft encoder with synchro flange, 58 mm precise optical
| Output frequency | ≤300 kHz (TTL) ≤160 kHz (HTL) |
| Admitted shaft load | ≤40 N axial ≤80 N radial |
| Resistance | DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 300 g, 6 ms |
| Connection | Flange connector M12, 8-pin Flange connector M23, 12-pin Cable |
| Sensing method | Optical |
| Starting torque | ≤0.015 Nm (+20 °C, IP 65) ≤0.02 Nm (+20 °C, IP 67) |
| Approval | UL 508 / CSA 22.2 |
| Initializing time | ≤30 ms after power on |
| Shaft type | ø6 x 10 mm, solid shaft with flat (synchro flange) |
| Scan ratio | 45...55 % typical at 2048 ppr |
| Relative humidity | 90 % non-condensing |
| Weight approx. | 300 g |
| Emitted interference | DIN EN 61000-6-3 |
| Output stages | TTL/RS422 HTL/push-pull |
| Operating temperature | -40...+100 °C |
| Operating speed | ≤6000 rpm (+20 °C, IP 67) ≤12000 rpm (+20 °C, IP 65) |
| manufacter SKU | EIL580P-SY - synchro flange |
| Voltage supply | 4.75...30 VDC |
| Short-circuit proof | Yes |
| Reverse polarity protection | Yes |
| Consumption w/o load | ≤70 mA |
| EIL580P-SY - synchro flange output signals | A+, B+, R+, A-, B-, R- |
| Programmable parameters | Output level TTL/HTL Pulse number 1...65536 Zero pulse width 90°/180° Zero pulse position Signal sequence |
| Interference immunity | DIN EN 61000-6-2 |
| Protection DIN EN 60529 | IP 65 (without shaft seal) IP 67 (with shaft seal) |
| Pulses per revolution | 1...65536 |
| Reference signal | Zero pulse 90° or 180° |
| Size (flange) | ø58 mm |
| Materials | Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel |
Comments
No comments yet