Baumer ExEIL580-B - blind hollow shaft

Incremental encoders
Baumer ExEIL580-B - blind hollow shaft
Price on Request
One click request
Materials Housing: aluminium die-cast
Flange: aluminium
Weight approx. 300 g
Reference signal Zero pulse, width 90° ±10 %
Protection DIN EN 60529 IP 65
Approval UL 508 / CSA 22.2
Interference immunity DIN EN 61000-6-2
Shaft type ø8...15 mm (blind hollow shaft)
Scan ratio 40...60 %
Reverse polarity protection Yes
Motor shaft tolerance 0.2 mm axial
0.03 mm radial
Resistance DIN EN 60068-2-6
Vibration 30 g, 10-2000 Hz
DIN EN 60068-2-27
Shock 250 g, 6 ms
Connection Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable
Relative humidity 90 % non-condensing
Pulses per revolution 100...5000
Explosion protection II 3 D Ex tc IIIC T135°C Dc X (dust): Special conditions "X" on page 10
Sensing method Optical
Output stages TTL/RS422
HTL/push-pull
Phase shift 90° ±10°
Output frequency ≤300 kHz (TTL)
≤160 kHz (HTL)
Emitted interference DIN EN 61000-6-3
Ambient temperature -20...+60 °C
Consumption w/o load ≤70 mA
Short-circuit proof Yes (HTL)
Yes (TTL, max. 1 s and 1 signal)
ExEIL580-B - blind hollow shaft output signals A+, B+, R+, A-, B-, R-
Starting torque ≤0.02 Nm (+20 °C)
Size (flange) ø58 mm
Operating speed ≤8000 rpm (+20 °C)
≤8000 rpm (+40 °C)
≤5000 rpm (+60 °C)
Voltage supply 5 VDC ±5 %
8...30 VDC
4.75...30 VDC
manufacter SKUExEIL580-B - blind hollow shaft
in international format without spaces
All fields are required