Baumer GI352

Incremental encoders
Baumer GI352
Price on Request
One click request
Shaft type ø9.52 mm solid shaft
Pulses per revolution 5...6000
Interference immunity DIN EN 61000-6-2
Voltage supply 5 VDC ±10 %
4.75...30 VDC
Size (flange) 63.5 x 63.5 mm
Sensing method Optical
manufacter SKUGI352
Flange Clamping flange square
63.5 x 63.5 mm
Admitted shaft load ≤20 N axial
≤40 N radial
Consumption w/o load ≤30 mA (24 VDC)
≤60 mA (5 VDC)
Materials Housing: aluminium
Flange: aluminium
Rotor moment of inertia 14.5 gcm²
Starting torque ≤0.015 Nm (IP 54)
≤0.03 Nm (IP 65)
Reverse polarity protection Yes (4.75...30 VDC)
Approval UL approval / E63076
Weight approx. 280 g
Reference signal Zero pulse, width 90°
GI352 output signals A 90° B, N + inverted
Resistance DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
Operating speed ≤10000 rpm
Connection MIL-connector, 7-pin
MIL-connector, 10-pin
Operating temperature -25...+100 °C (5 VDC)
-25...+85 °C (24 VDC)
Relative humidity 95 % non-condensing
Output stages Linedriver/RS422
Push-pull short-circuit proof
Output frequency ≤150 kHz
Emitted interference DIN EN 61000-6-4
Protection DIN EN 60529 IP 54 (without shaft seal)
IP 65 (with shaft seal)
in international format without spaces